编者：其实也就是构建个WebServer服务器，只不过这里是以boa+cgic来实现的

1、移植boa软件

所用的软件为boa-0.94.13.tar.gz

先进行解压到当前目录

#tar -zxvf  boa-0.94.13.tar.gz

cd /boa-0.94.13 /src

 #./configure

修改Makefile

修改31,32行

CC=arm-linux-gcc

CPP=arm-linux-g++ -E

修改当前目录下boa.c的225~227行，直接删除即可

原话为

if（setuid(0)!=-1）{

DIE()

}

修改compat.h

120行

改为如下

#define TIME_OFFSET(foo) (foo)->tm_gmtoff

编译

#make

优化

#arm-linux-strip boa

2、移植cgic库

cgic205.tar.gz

解压当当前目录

修改Makefile

修改为如下（红色的地方为改过的）

CFLAGS=-g -Wall

CC=arm-linux-gcc

AR=arm-linux-ar

RANLIB=arm-linux-ranlib

LIBS=-L./ -lcgic

all: libcgic.a cgictest.cgi capture

install: libcgic.a

 cp libcgic.a /usr/local/lib

 cp cgic.h /usr/local/include

 @echo libcgic.a is in /usr/local/lib. cgic.h is in /usr/local/include.

libcgic.a: cgic.o cgic.h

 rm -f libcgic.a

 $(AR) rc libcgic.a cgic.o

 $(RANLIB) libcgic.a

#mingw32 and cygwin users: replace .cgi with .exe

cgictest.cgi: cgictest.o libcgic.a

 $(CC) $(CFLAGS) cgictest.o -o cgictest.cgi ${LIBS}

capture: capture.o libcgic.a

 $(CC) $(CFLAGS) capture.o -o capture ${LIBS}

clean:

 rm -f *.o *.a cgictest.cgi capture


编译

#make

优化

#arm-linux-strip capture


配置webserver

在文件系统里面建立新目录/web,在/etc/建立boa目录

将刚才生成的boa和boa.conf配置文件分别拷贝到相应目录

#cp /boa /sbin

#cp /boa.conf /etc/boa

#vi boa.conf

下面红色的是修改过的内容

# Boa v0.94 configuration file # File format has not changed from 0.93 # File format has changed little from 0.92 # version changes are noted in the comments # # The Boa configuration file is parsed with a lex/yacc or flex/bison # generated parser.  If it reports an error, the line number will be # provided; it should be easy to spot.  The syntax of each of these # rules is very simple, and they can occur in any order.  Where possible # these directives mimic those of NCSA httpd 1.3; I saw no reason to  # introduce gratuitous differences.  # $Id: boa.conf,v 1.25 2002/03/22 04:33:09 jnelson Exp $  # The "ServerRoot" is not in this configuration file.  It can be compiled # into the server (see defines.h) or specified on the command line with # the -c option, for example: # # boa -c /usr/local/boa   # Port: The port Boa runs on.  The default port for http servers is 80. # If it is less than 1024, the server must be started as root.  Port 80  # Listen: the Internet address to bind(2) to.  If you leave it out, # it takes the behavior before 0.93.17.2, which is to bind to all # addresses (INADDR_ANY).  You only get one "Listen" directive, # if you want service on multiple IP addresses, you have three choices: #    1. Run boa without a "Listen" directive #       a. All addresses are treated the same; makes sense if the addresses #          are localhost, ppp, and eth0. #       b. Use the VirtualHost directive below to point requests to different #          files.  Should be good for a very large number of addresses (web #          hosting clients). #    2. Run one copy of boa per IP address, each has its own configuration #       with a "Listen" directive.  No big deal up to a few tens of addresses. #       Nice separation between clients. # The name you provide gets run through inet_aton(3), so you have to use dotted # quad notation.  This configuration is too important to trust some DNS.  #Listen 192.68.0.5  #  User: The name or UID the server should run as. # Group: The group name or GID the server should run as.  User root Group root  # ServerAdmin: The email address where server problems should be sent. # Note: this is not currently used, except as an environment variable # for CGIs.  #ServerAdmin root@localhost  # ErrorLog: The location of the error log file. If this does not start # with /, it is considered relative to the server root. # Set to /dev/null if you don't want errors logged. # If unset, defaults to /dev/stderr  ErrorLog /dev/console # Please NOTE: Sending the logs to a pipe ('|'), as shown below, #  is somewhat experimental and might fail under heavy load. # "Usual libc implementations of printf will stall the whole #  process if the receiving end of a pipe stops reading." #ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"  # AccessLog: The location of the access log file. If this does not # start with /, it is considered relative to the server root. # Comment out or set to /dev/null (less effective) to disable  # Access logging.  AccessLog /dev/null # Please NOTE: Sending the logs to a pipe ('|'), as shown below, #  is somewhat experimental and might fail under heavy load. # "Usual libc implementations of printf will stall the whole #  process if the receiving end of a pipe stops reading." #AccessLog  "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"  # UseLocaltime: Logical switch.  Uncomment to use localtime  # instead of UTC time #UseLocaltime  # VerboseCGILogs: this is just a logical switch. #  It simply notes the start and stop times of cgis in the error log # Comment out to disable.  #VerboseCGILogs  # ServerName: the name of this server that should be sent back to  # clients if different than that returned by gethostname + gethostbyname   ServerName yellow  # VirtualHost: a logical switch. # Comment out to disable. # Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A' # become /var/www/IP-A. # Example: http://localhost/ becomes /var/www/127.0.0.1 # # Not used until version 0.93.17.2.  This "feature" also breaks commonlog # output rules, it prepends the interface number to each access_log line. # You are expected to fix that problem with a postprocessing script.  #VirtualHost   # DocumentRoot: The root directory of the HTML documents. # Comment out to disable server non user files.  DocumentRoot /web  # UserDir: The name of the directory which is appended onto a user's home # directory if a ~user request is recieved.  #UserDir public_html  # DirectoryIndex: Name of the file to use as a pre-written HTML # directory index.  Please MAKE AND USE THESE FILES.  On the # fly creation of directory indexes can be _slow_. # Comment out to always use DirectoryMaker  DirectoryIndex index.html  # DirectoryMaker: Name of program used to create a directory listing. # Comment out to disable directory listings.  If both this and # DirectoryIndex are commented out, accessing a directory will give # an error (though accessing files in the directory are still ok).  #DirectoryMaker /usr/lib/boa/boa_indexer  # DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker # has been commented out, the the on-the-fly indexing of Boa can be used # to generate indexes of directories. Be warned that the output is  # extremely minimal and can cause delays when slow disks are used. # Note: The DirectoryCache must be writable by the same user/group that  # Boa runs as.  # DirectoryCache /var/spool/boa/dircache  # KeepAliveMax: Number of KeepAlive requests to allow per connection # Comment out, or set to 0 to disable keepalive processing  KeepAliveMax 1000  # KeepAliveTimeout: seconds to wait before keepalive connection times out  KeepAliveTimeout 10  # MimeTypes: This is the file that is used to generate mime type pairs # and Content-Type fields for boa. # Set to /dev/null if you do not want to load a mime types file. # Do *not* comment out (better use AddType!)  MimeTypes /etc/mime.types  # DefaultType: MIME type used if the file extension is unknown, or there # is no file extension.  DefaultType text/plain  # CGIPath: The value of the $PATH environment variable given to CGI progs.  CGIPath /bin:/usr/bin:/usr/local/bin:/usr/sbin:/sbin  # SinglePostLimit: The maximum allowable number of bytes in  # a single POST.  Default is normally 1MB.  # AddType: adds types without editing mime.types # Example: AddType type extension [extension ...]  # Uncomment the next line if you want .cgi files to execute from anywhere # AddType application/x-httpd-cgi cgi  # Redirect, Alias, and ScriptAlias all have the same semantics -- they # match the beginning of a request and take appropriate action.  Use # Redirect for other servers, Alias for the same server, and ScriptAlias # to enable directories for script execution.  # Redirect allows you to tell clients about documents which used to exist in # your server's namespace, but do not anymore. This allows you to tell the # clients where to look for the relocated document. # Example: Redirect /bar http://elsewhere/feh/bar  # Aliases: Aliases one path to another. # Example: Alias /path1/bar /path2/foo  #Alias /doc /usr/doc  # ScriptAlias: Maps a virtual path to a directory for serving scripts # Example: ScriptAlias /htbin/ /www/htbin/  ScriptAlias /cgi-bin/ /web/cgi-bin

3、在、web下建立cgi-bin目录，然后将编译好的cgic库文件（capture和cgic）和测试文件cgicctest.cgi下载到/web/cgi-bin下

运行boa,然后再PC的浏览器中输入http://192.168.1.107/cgi-bin/cgictest.cgi 即可进行测试

4、我直接将TQ文件系统的web考了过去，测试正常运行。