华为eNSP浮动路由实现不同vlan之间的通信

原创

ntdjingcai 2018-05-09 08:45:41 ©著作权

文章标签 浮动路由 文章分类 运维

©著作权归作者所有：来自51CTO博客作者ntdjingcai的原创作品，请联系作者获取转载授权，否则将追究法律责任

实验要求:为两个路由器之间配置浮动路由，两台主机互通 AR9 <Huawei>undo terminal monitor #关闭提示信息 Info: Current terminal monitor is off. <Huawei>sys #进入系统视图 Enter system view, return user view with Ctrl+Z. [Huawei]int g0/0/0 #进入端口视图 [Huawei-GigabitEthernet0/0/0]ip add 192.168.1.254 24 #配置IP地址 [Huawei-GigabitEthernet0/0/0]q [Huawei]int g0/0/2 [Huawei-GigabitEthernet0/0/2]ip add 192.168.2.1 24 [Huawei-GigabitEthernet0/0/2]q [Huawei]int g0/0/1 [Huawei-GigabitEthernet0/0/1]ip add 192.168.3.1 24 [Huawei-GigabitEthernet0/0/1]q [Huawei]ip route-static 192.168.4.0 24 192.168.2.2 preference 60 #配置路由协议的优先级为60（注：优先级越小越好） [Huawei]ip route-static 192.168.4.0 24 192.168.3.2 preference 80 AR10 <Huawei>undo terminal monitor Info: Current terminal monitor is off [Huawei]int g0/0/1 [Huawei-GigabitEthernet0/0/1]ip add 192.168.4.254 24 [Huawei-GigabitEthernet0/0/1]q [Huawei]int g0/0/2 [Huawei-GigabitEthernet0/0/2]ip add 192.168.2.2 24 [Huawei-GigabitEthernet0/0/2]q [Huawei]int g0/0/0 [Huawei-GigabitEthernet0/0/0]ip add 192.168.3.2 24 [Huawei-GigabitEthernet0/0/0]q [Huawei]ip route-static 192.168.1.0 24 192.168.2.1 preference 60 Info: Succeeded in modifying route. [Huawei]ip route-static 192.168.1.0 24 192.168.3.1 preference 80 Info: Succeeded in modifying route. 验证:在AR9和AR10的命令行输入display routing-table AR9如图所示：

AR10如图所示：

现在我们看到的路由是主路由，两台主机也能互通现在我们更改优先级，使用备用路由互通 AR9 <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]ip route-static 192.168.4.0 24 192.168.2.2 preference 80 Info: Succeeded in modifying route. [Huawei]ip route-static 192.168.4.0 24 192.168.3.2 preference 60 Info: Succeeded in modifying route. AR10 [Huawei]ip route-static 192.168.1.0 24 192.168.2.1 preference 80 Info: Succeeded in modifying route. [Huawei]ip route-static 192.168.1.0 24 192.168.3.1 preference 60 Info: Succeeded in modifying route. 验证:在AR9和AR10的命令行输入display routing-table，且两台主机互通 AR9如图所示