1.配置VLAN和接口
[LSW2]vlan batch 2 3
[LSW2]port-group a2
[LSW2-port-group-a2]group-member g0/0/1 to g0/0/2
[LSW2-port-group-a2]port link-type access
[LSW2-port-group-a2]port default vlan 2
[LSW2]port-group a3
[LSW2-port-group-a3]group-member g0/0/3 to g0/0/4
[LSW2-port-group-3]port link-type access
[LSW2-port-group-3]port default vlan 3
[LSW2-GigabitEthernet0/0/5]port link-type trunk
[LSW2-GigabitEthernet0/0/5]port trunk allow-pass vlan 2 3
[LSW1]vlan batch 2 3 10 100
[LSW1-GigabitEthernet0/0/2]port link-type trunk
[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 2 3
2.配置Super-VLAN及其对应的VLANIF接口
[LSW1]vlan 10
[LSW1-vlan10]aggregate-vlan
[LSW1-vlan10]access-vlan 2 to 3
[LSW1-Vlanif10]ip add 10.1.1.10 24
3.配置上行路由
[LSW1-GigabitEthernet0/0/1]port link-type trunk
[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100
[LSW1-GigabitEthernet0/0/1]port trunk pvid vlan 100
[LSW1]int Vlanif 100
[LSW1-Vlanif100]ip add 10.1.100.10 24
[LSW1]ip route-static 0.0.0.0 0.0.0.0 10.1.100.1 //配置缺省静态路由，使用户能够访问Internet
4.配置AR1
[AR1-GigabitEthernet0/0/0]ip add 10.1.100.1 24
[AR1]ip route-static 10.1.1.0 24 10.1.100.10
5.配置PC
6.配置Proxy ARP
[LSW1]interface Vlanif 10
[LSW1-Vlanif10]arp-proxy inner-sub-vlan-proxy enable
7.验证配置
