安装 multipath软件
yum -y install device-mapper-multipath
启动守护进程
mpathconf --enable --with_multipath y
启动multipath 进程
service multipath start
查看多路径设备
multipath -v2
multipath -ll
配置multipathd 使其正常工作，编辑/etc/multipath.conf，开放如下内容：
defaults {
udev_dir /dev
polling_interval 10
selector "round-robin 0"
path_grouping_policy multibus
getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
prio_callout none
path_checker readsector0
rr_min_io 100
max_fds 8192
rr_weight priorities
failback immediate
no_path_retry fail
user_friendly_names yes
}
blacklist {
wwid 26353900f02796769
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
devnode "^hd[a-z]"
}
4、并关闭如下内容
#blacklist {
# devnode "*"
#}
#defaults {
27 # user_friendly_names yes
28 #}
5、完成之后执行如下命令发现多路径：
[root@RKDB01 Server]# modprobe dm-multipath
[root@RKDB01 Server]# multipath -F
[root@RKDB01 Server]# multipath dm-multipath
[root@RKDB01 Server]# multipath dm-round-robin
[root@RKDB01 Server]# service multipathd restart
正在关闭multipathd 端口监控程序： [确定]
正在启动守护进程multipathd： [确定]
[root@RKDB01 Server]# multipath -v2
[root@RKDB01 Server]# multipath -ll
mpath1 (3600d02310000011b16a5d57c6a1bd99a) dm-0 TOYOU,NetStor_iSUM510
[size=3.3T][features=0][hwhandler=0][rw]
\_ round-robin 0 [prio=2][ena bled]
\_ 1:0:0:0 sdb 8:16 [failed][ready]
\_ 1:0:1:0 sdc 8:32 [failed][ready]
