1.什么是NFS?
NFS,全名叫Network File System,中文叫网络文件系统,是Linux、UNIX系统的分布式文件系统的一个组成部分,可实现在不同网络上共享远程文件系统。NFS由Sun公 司开发,目前已经成为文件服务的一种标准之一。其最大的功能就是可以通过网络,让不同操作系统的计算机可以共享数据, 所以可以把NFS看做是一个文件服务器。NFS缺点是其读写性能比本地硬盘要差一些。
2.使用yum安装nfs-utils、rpcbind
实验环境
centos 6.6
nfs-server 10.0.0.130
lamp-client 10.0.0.137
lnmp-client 10.0.0.138
3.nfs服务端软件安装
[root@nfs-server ~]# yum -y install nfs-utils rpcbind
创建共享文件夹
[root@nfs-server ~]# mkdir -p {/data/r_shared,/data/w_shared}查看文件是否创建成功
[root@nfs-server data]# ll
总用量 8
drwxr-xr-x 2 nfsnobody root 4096 4月 23 15:13 r_shared
drwxr-xr-x 2 nfsnobody root 4096 4月 23 15:24 w_shared
[root@nfs-server data]#
给文件授权[root@nfs-server data]# chown -R nfsnobody r_shared w_shared
[root@nfs-server data]# ll
总用量 8
drwxr-xr-x 2 nfsnobody root 4096 4月 23 15:13 r_shared
drwxr-xr-x 2 nfsnobody root 4096 4月 23 15:24 w_shared
[root@nfs-server data]#
4.启动rpcbind、nfs
[root@nfs-server ~]# /etc/init.d/rpcbind start
[root@nfs-server ~]# /etc/init.d/nfs start
[root@nfs-server ~]# /etc/init.d/nfs status
rpc.svcgssd 已停
rpc.mountd (pid 4759) 正在运行...
nfsd (pid 4775 4774 4773 4772 4771 4770 4769 4768) 正在运行...
rpc.rquotad (pid 4754) 正在运行...
[root@nfs-server ~]# /etc/init.d/rpcbind status
rpcbind (pid 1656) 正在运行...
[root@nfs-server ~]# [root@nfs ~]# lsof -i :111
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
rpcbind 2664 rpc 6u IPv4 15806 0t0 UDP *:sunrpc
rpcbind 2664 rpc 8u IPv4 15809 0t0 TCP *:sunrpc (LISTEN)
rpcbind 2664 rpc 9u IPv6 15811 0t0 UDP *:sunrpc
rpcbind 2664 rpc 11u IPv6 15814 0t0 TCP *:sunrpc (LISTEN)
[root@nfs ~]# netstat -tunpl|grep "111"
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2664/rpcbind
tcp 0 0 :::111 :::* LISTEN 2664/rpcbind
udp 0 0 0.0.0.0:111 0.0.0.0:* 2664/rpcbind
udp 0 0 :::111 :::* 2664/rpcbind
[root@nfs ~]#
[root@nfs ~]# chkconfig --list rpcbind 查看开机是否自启
rpcbind 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[root@nfs ~]#
[root@nfs ~]# /etc/init.d/nfs status
rpc.svcgssd 已停
rpc.mountd is stopped
nfsd is stopped
rpc.rquotad is stopped
[root@nfs ~]# /etc/init.d/nfs start
Starting NFS services: [ OK ]
Starting NFS quotas: [ OK ]
Starting NFS mountd: [ OK ]
Starting NFS daemon: [ OK ]
正在启动 RPC idmapd: [确定]
[root@nfs ~]# netstat -tunpl |grep 2049
tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN -
tcp 0 0 :::2049 :::* LISTEN -
udp 0 0 0.0.0.0:2049 0.0.0.0:* -
udp 0 0 :::2049 :::* -
[root@nfs ~]# lsof -i:2049
[root@nfs ~]# rpcinfo -p localhost
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100011 1 udp 875 rquotad
100011 2 udp 875 rquotad
100011 1 tcp 875 rquotad
100011 2 tcp 875 rquotad
100005 1 udp 48501 mountd
100005 1 tcp 36022 mountd
100005 2 udp 43391 mountd
100005 2 tcp 39405 mountd
100005 3 udp 49218 mountd
100005 3 tcp 41793 mountd
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100227 2 tcp 2049 nfs_acl
100227 3 tcp 2049 nfs_acl
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100227 2 udp 2049 nfs_acl
100227 3 udp 2049 nfs_acl
100021 1 udp 59606 nlockmgr
100021 3 udp 59606 nlockmgr
100021 4 udp 59606 nlockmgr
100021 1 tcp 56597 nlockmgr
100021 3 tcp 56597 nlockmgr
100021 4 tcp 56597 nlockmgr
[root@nfs ~]#
5.修改nfs配置文件
[root@nfs-server ~]# vi /etc/exports
/data/w_shared 10.0.0.0/24(rw,sync,all_squash)
/data/r_shared 10.0.0.0/24(ro)
注:下面介绍一些配置文件中常用的参数含义,以及客户端的IP地址的格式。
rw:可读写权限。
ro:只读权限。
no_root_squash:当登录NFS服务器主机使用共享目录的使用者是root时,其权限将被转换成为匿名使用者,通常它的UID与GID都会变成nobody身份。
root_squash;如果登录NFS主机使用共享目录的使用者是root,那么对于这个共享的目录来说,它具有root的权限,这样会涉及到安全性的问题。
all_squash:忽略登录NFS使用者的身份,其身份都会被转换为匿名使用者,通常即nobody。
anonuid:通常为nobody,也可以自行设定这个UID的值,UID必须存在于/etc/passwd中。
anongid:同anonuid,但是变为Group ID。
sync:同步写入资料到内存与硬盘中。
async:资料会先暂存于内存中,而非直接写入硬盘。
[root@nfs-server ~]#exportfs -r 让其平滑生效
6.nfs客服端配置
[root@lamp01 ~]# yum -y install nfs-utils rpcbind
创建挂载点目录
[root@lamp01 ~]# mkdir -p {/data/b_r,/data/b_w}查看文件是否创建成功
[root@lamp01 ~]# ll /data
总用量 8
drwxr-xr-x 2 nfsnobody root 4096 4月 23 15:13 b_r
drwxr-xr-x 2 nfsnobody root 4096 4月 23 15:24 b_w测试挂载
[root@lamp01 ~]# showmount -e 10.0.0.130
Export list for 10.0.0.130:
/data/r_shared 10.0.0.0/24
/data/w_shared 10.0.0.0/24
[root@lamp01 ~]#挂载
[root@lamp01 ~]#mount.nfs 10.0.0.130:/data/r_shared /data/b_r
[root@lamp01 ~]#mount -t nfs 10.0.0.130:/data/w_shared /data/b_w
查看是否挂载成功
[root@lamp01 ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 18244476 1582428 15728624 10% /
tmpfs 515244 0 515244 0% /dev/shm
/dev/sda1 194241 25657 158344 14% /boot
10.0.0.130:/data/r_shared
18244480 1582464 15728640 10% /data/b_r
10.0.0.130:/data/w_shared
18244480 1582464 15728640 10% /data/b_w
umount.nfs: device is busy解决
#umount /mnt/nfs 可能会出现device is busy的问题。
解决方法:
1. /etc/init.d/rpcbind stop, /etc/init.d/rpcbind start
2. 然后umount ,如不行 umount –f /mnt/nfs强行卸载。
3 再执行上述命令umount文件系统。
#umount /mnt/nfs 可能会出现device is busy的问题。
解决方法:
1. /etc/init.d/rpcbind stop, /etc/init.d/rpcbind start
2. 然后umount ,如不行 umount –f /mnt/nfs强行卸载。
3 再执行上述命令umount文件系统。