OSPF 宣告网段方法
原创
©著作权归作者所有：来自51CTO博客作者You0tech的原创作品，请联系作者获取转载授权，否则将追究法律责任
network
[R1]ospf 1 router-id 6.6.6.6
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 10.16.6.1 0.0.0.0
[R1-ospf-1-area-0.0.0.0]quit
接口下通告
[R1]int LoopBack 0
[R1-LoopBack0]dis this
[V200R003C00]
#
interface LoopBack0
ip address 6.6.6.6 255.255.255.0
#
return
[R1-LoopBack0]ospf enable area 0
OSPF虚链路
ospf 1
area 0
vlink-peer 3.3.3.3 (3.3.3.3 是对端的router-)
OSPF 路由表
[R2]display ip routing-table protocol ospf
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Public routing table : OSPF
Destinations : 9 Routes : 9
OSPF routing table status : <Active>
Destinations : 9 Routes : 9
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.1/32 OSPF 10 1 D 10.1.12.1 GigabitEthernet
0/0/0
3.3.3.3/32 OSPF 10 2 D 10.1.27.7 GigabitEthernet
0/0/1
5.5.5.5/32 OSPF 10 1 D 10.1.12.5 GigabitEthernet
0/0/0
6.6.6.6/32 OSPF 10 49 D 10.1.12.1 GigabitEthernet
0/0/0
7.7.7.7/32 OSPF 10 1 D 10.1.27.7 GigabitEthernet
0/0/1
8.8.8.8/32 OSPF 10 1 D 10.1.12.8 GigabitEthernet
0/0/0
9.9.9.0/24 OSPF 10 2 D 10.1.27.7 GigabitEthernet
0/0/1
10.1.16.0/24 OSPF 10 49 D 10.1.12.1 GigabitEthernet
0/0/0
10.1.37.0/24 OSPF 10 2 D 10.1.27.7 GigabitEthernet
0/0/1
查看OSPF 邻居
[R1]dis ospf peer brief
OSPF Process 1 with Router ID 1.1.1.1
Peer Statistic Information
----------------------------------------------------------------------------
Area Id Interface Neighbor id State
0.0.0.0 GigabitEthernet0/0/0 2.2.2.2 Full
0.0.0.0 GigabitEthernet0/0/0 5.5.5.5 Full
0.0.0.0 GigabitEthernet0/0/0 8.8.8.8 Full
0.0.0.1 Serial2/0/0 6.6.6.6 Full
----------------------------------------------------------------------------
[R1]
