HP DL160 G5, iLO Password Reset
精选 转载1. Create a DOS bootable disk (floppy or USB key)
2. Download the IPMItool from this link: http://www.intel.com/design/servers/ipmi/ipmi_tool.htm
3. Copy the IPMItool.exe to the bootable disk
4. Boot the server using the bootable disk
5. Run "ipmitool.exe 20 18 47 03 02 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00"
6. Now your password should reset back to "admin"
Note that your user name is not changed, so you need to use the same user name.
提问和评论都可以,用心的回复会被更多人看到
评论
发布评论
相关文章
-
5G技术与物联网的融合会带来什么机遇和挑战
5G技术与物联网的融合会带来什么机遇和挑战
物联网 实时监控 物联网技术 -
HP-DL380G5硬件安装
不错!图文并茂哦。
安装 硬件 职场 休闲 HP-DL380G5 -
HP Proliant DL360 G9使用业务网卡登录ILO管理
因为我的服务器是放在家里的,就得找个不太碍事的地方放起来,这就引入了一个问题:怎么方便地实现同时访问iLO管理地址和业务地址。其实也不难,拉两根网线就可以了;但是路由器到橱顶也有几米的距离,同时拉两根网线又占用路由器接口。所以我最开始的解决方案是一根网线拉到业务口,再用一根短网线把iLO口和另外一个业务口连起来,然后在VMware同一虚拟交换机里面添加两个网口,就实现了通过管理用的跳板虚拟机来访问iLO管理。但是如果VMware或者虚拟机运行异常,服务器就托管了。后来百度学到了另外一个方法,那就是使
ssa windows server 运维 刀片服务器 lom -
HP iLO4 配置 RAID 5
HP iLO4 配置 RAID 5
HP iLO4 RAID5 Gen9