命令
mpstat
pidstat
pidstat主要用于监控全部或指定进程占用系统资源的情况,如CPU,内存、设备IO、任务切换、线程等。pidstat首次运行时显示自系统启动开始的各项统计信息,之后运行pidstat将显示自上次运行该命令以后的统计信息。用户可以通过指定统计的次数和时间来获得所需的统计信息。
选项
-C comm #只显示那些包含字符串(可是正则表达式)comm的命令的名字
-d #显示I/O统计信息(须内核2.6.20及以后)
PID #进程号
kB_rd/s #每秒此进程从磁盘读取的千字节数
kB_wr/s #此进程已经或者将要写入磁盘的每秒千字节数
kB_ccwr/s #由任务取消的写入磁盘的千字节数
Command #命令的名字
-h #显示所有的活动的任务
-I #在SMP环境,指出任务的CPU使用(等同于选项-u)应该被除于cpu的总数
-l #显示进程的命令名和它的参数
-p { pid [,...] | SELF | ALL } #指定线程显示其报告
-r #显示分页错误的内存利用率
When reporting statistics for individual tasks, the following values are displayed:
PID #进程号
minflt/s #每秒次缺页错误次数(minor page faults),次缺页错误次数意即虚拟内存地址映射成物理内存地址产生的page fault次数
majflt/s #每秒主缺页错误次数(major page faults),当虚拟内存地址映射成物理内存地址时,相应的page在swap中,这样的page fault为major page fault,一般在内存使用紧张时产生
VSZ #该进程使用的虚拟内存(以kB为单位)
RSS #该进程使用的物理内存(以kB为单位)
%MEM #当前任务使用的有效内存的百分比
Command #任务的命令名
When reporting global statistics for tasks and all their children, the following values are displayed:
PID #PID号
minflt-nr #在指定的时间间隔内收集的进程和其子进程的次缺页错误次数
majflt-nr #在指定的时间间隔内收集的进程和其子进程的主缺页错误次数
Command #命令名
-s #堆栈的使用
-t #显示与所选任务相关的线程的统计数据
-T { TASK | CHILD | ALL } #指定必须监测的内容:TASK是默认的,单个任务的报告;CHILD:指定的进程和他们的子进程的全局报告,ALL:相当于TASK和CHILD
-u #报告CPU使用
When reporting statistics for individual tasks, the following values are displayed:
PID
%usr #用户层任务正在使用的CPU百分比(with or without nice priority ,NOT include time spent running a virtual processor)
%system #系统层正在执行的任务的CPU使用百分比
%guest #运行虚拟机的CPU占用百分比
%CPU #所有的使用的CPU的时间百分比
CPU #处理器数量
Command #命令
When reporting global statistics for tasks and all their children, the following values are displayed:
PID #PID号
usr-ms #在指定时间内收集的在用户层执行的进程和它的子进程占用的CPU时间(毫秒){with or without nice priority,NOT include time spent running a virtual processor)
system-ms #在指定时间内收集的在系统层执行的进程和它的子进程占用的CPU时间(毫秒)
guest-ms #花在虚拟机上的时间
Command #命令
-V #版本号
-w #报告任务切换情况
PID #PID号
cswch/s #每秒自动上下文切换
nvcswch/s #每秒非自愿的上下文切换
Command #命令
显示字段解释:https://blog.csdn.net/weixin_42121713/article/details/80784859
vmstat
查看某进程线程数的几种方法
pstree -p 1388 | wc -l
cat /proc/1388/status | grep Threads
ps xH
手册中说:H Show threads as if they were processes
这样可以查看所有存在的线程。ps -mp <PID>
手册中说:m Show threads after processes
这样可以查看一个进程起的线程数。