#http://hi.baidu.com/winshining/item/3d964328e252b6cfdcf69aaa
#http://www.verydemo.com/demo_c281_i514.html
简介： Linux 发行版本众多，现如今也得到了越来越广泛的应用，同时也面临着系统出现故障的潜在风险，本文将详细介绍几种 Linux 灾难恢复技术和方法，以确保 Linux 系统安全恢复。
Linux 灾难恢复
Linux 发行版本众多，现如今也得到了越来越广泛的应用，同时也面临着系统出现故障的潜在风险，本文将以发行版本 RHEL6 为例详细介绍几种 Linux 灾难恢复技术和方法，以确保 Linux 系统的安全恢复。
在介绍 Linux 灾难恢复方法之前，我们先来了解下 MBR，其全称为 Master Boot Record，即硬盘的主引导记录。它由三个部分组成，主引导程序、硬盘分区表和硬盘有效标志。在总共 512 字节的主引导扇区里主引导程序（Bootloader）占 446 个字节，第二部分是硬盘分区表，占 64 个字节，硬盘有多少分区以及每一分区的大小都记录在其中。第三部分是硬盘有效标志，占 2 个字节。具体如图示：
图 1. MBR
系统硬盘分区表破坏
生产环境中的 Linux 服务器可能会因为病毒或者意外断电而引起硬盘分区表被破坏，通常恢复硬盘分区表需要之前我们先备份其分区表的信息，一般我们使用 USB 外接设备来备份主机硬盘的分区表。
在主机上挂载 USB 设备后我们查看系统当前磁盘设备 :
[root@FCoE ~]# fdisk -l
Disk /dev/sda: 43.0 GB, 42991616000 bytes
255 heads, 63 sectors/track, 5226 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00032735
Device Boot Start End Blocks Id System
/dev/sda1 * 1 17 131072 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 17 147 1048576 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/sda3 147 5227 40803328 83 Linux
Disk /dev/sdb: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdb doesn't contain a valid partition table
现在我们在 sdb 这个设备上创建一个新的分区 :
[root@FCoE ~]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xcdd48395.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-261, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-261, default 261):
Using default value 261
Command (m for help): p
Disk /dev/sdb: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcdd48395
Device Boot Start End Blocks Id System
/dev/sdb1 1 261 2096451 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
在新分区 sdb1 上创建文件系统：
[root@FCoE ~]# mkfs.ext3 /dev/sdb1
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
131072 inodes, 524112 blocks
26205 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=536870912
16 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 24 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
挂载新的文件系统：
[root@FCoE ~]# mount /dev/sdb1 /mnt/
通常我们通过备份硬盘的 MBR 来备份硬盘分区表：
[root@FCoE ~]# dd if=/dev/sda of=/mnt/sda.mbr bs=512 count=1
1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000777948 s, 658 kB/s
现在我们来写零硬盘分区表来实现类似分区表被破坏的结果：
[root@FCoE ~]# dd if=/dev/zero of=/dev/sda bs=1 count=64 skip=446 seek=446
64+0 records in
64+0 records out
64 bytes (64 B) copied, 0.00160668 s, 39.8 kB/s
查询硬盘 sda 上的分区信息，发现其已不包含任何分区：
[root@FCoE ~]# fdisk -l
Disk /dev/sda: 43.0 GB, 42991616000 bytes
255 heads, 63 sectors/track, 5226 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00032735
Device Boot Start End Blocks Id System
Disk /dev/sdb: 2147 MB, 2147483648 bytes
255 heads, 63 sectors/track, 261 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcdd48395
Device Boot Start End Blocks Id System
/dev/sdb1 1 261 2096451 83 Linux
当主机硬盘分区表丢失了之后，再次启动后 GRUB 会因找不到配置文件而进入命令行模式 :
图 2. 分区表丢失
接下来我们挂载 RHEL6 的安装盘，同时也接入我们之前备份的 USB 设备，然后重启主机，选择 CD-ROM 为第一引导设备，启动后选择“Rescue installed system”。
图 3. 选择援救
按照提示，最终我们选择一个 shell。
图 4. 选择 shell
本篇文章来源于 Linux公社网站(www.linuxidc.com) 原文链接：http://www.linuxidc.com/Linux/2012-09/70971.htm
