路由器1的配置：
interface Eth-Trunk1 #作端口聚合配置
ip address 192.168.1.1 255.255.255.0
interface Ethernet0/0/0
undo shutdown
eth-trunk 1
interface Ethernet0/0/1
undo shutdown
eth-trunk 1
# #创建不同网段的环回接口
interface LoopBack4
ip address 192.168.40.1 255.255.255.255
interface LoopBack5
ip address 192.168.50.1 255.255.255.255
interface LoopBack6
ip address 192.168.60.1 255.255.255.255
#
rip 1 #启用rip version 2协议、向外宣告网段
undo summary
version 2
network 192.168.1.0
network 192.168.40.0
network 192.168.50.0
network 192.168.60.0
路由器2的配置：
interface Eth-Trunk1 #作端口聚合配置
ip address 192.168.1.2 255.255.255.0
interface Ethernet0/0/0
undo shutdown
eth-trunk 1
interface Ethernet0/0/1
undo shutdown
eth-trunk 1
# #创建不同网段的环回接口
interface LoopBack1
ip address 192.168.10.1 255.255.255.255
interface LoopBack2
ip address 192.168.20.1 255.255.255.255
interface LoopBack3
ip address 192.168.30.1 255.255.255.255
#
rip 1 #启用rip version 2协议、向外宣告网段
undo summary
version 2
network 192.168.1.0
network 192.168.10.0
network 192.168.20.0
network 192.168.30.0
