########################################################################### 1.1.系统版本: [root@localhost ~]# cat /etc/redhat-release CentOS Linux release 7.4.1708 (Core)

###########################################################################

2.1.查看系统磁盘状况: [root@localhost ~]# fdisk -l

Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x00064b7e

Device Boot Start End Blocks Id System /dev/sda1 * 2048 1026047 512000 83 Linux /dev/sda2 1026048 41943039 20458496 8e Linux LVM

Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x7161e435

Device Boot Start End Blocks Id System /dev/sdb1 2048 41943039 20970496 8e Linux LVM

Disk /dev/sdc: 21.5 GB, 21474836480 bytes, 41943040 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mapper/centos-root: 15.7 GB, 15703474176 bytes, 30670848 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mapper/centos-swap: 5242 MB, 5242880000 bytes, 10240000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/mapper/vggroup001-lvdata: 20.4 GB, 20401094656 bytes, 39845888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes

######################################################################

3.1 使用 fdisk 创建分区,进入分区管理

[root@localhost ~]# fdisk /dev/sdc Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them. Be careful before using the write command.

Device does not contain a recognized partition table Building a new DOS disklabel with disk identifier 0x17068859.

Command (m for help): n # 新建分区。 Partition type: p primary (0 primary, 0 extended, 4 free) e extended # 扩展分区。 Select (default p): p # 新建分区为主分区 。
Partition number (1-4, default 1): 1 # 分区的ID 号。 First sector (2048-41943039, default 2048): Using default value 2048 Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): Using default value 41943039 Partition 1 of type Linux and of size 20 GiB is set

Command (m for help): t # 修改分区格式。 Selected partition 1 Hex code (type L to list all codes): 8e # 类型改为 8e。 Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): p # 查看当前分区。

Disk /dev/sdc: 21.5 GB, 21474836480 bytes, 41943040 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x17068859

Device Boot Start End Blocks Id System /dev/sdc1 2048 41943039 20970496 8e Linux LVM

Command (m for help): w # 保存。 The partition table has been altered!

Calling ioctl() to re-read partition table. Syncing disks.

########################################################################### 4.1 创建 PV。 [root@localhost ~]# pvcreate /dev/sdc1 # 创建 PV。 Physical volume "/dev/sdc1" successfully created. [root@localhost ~]# partprobe

[root@localhost ~]# pvdisplay # 查看 PV。 "/dev/sdc1" is a new physical volume of "<20.00 GiB" --- NEW Physical volume --- PV Name /dev/sdc1 VG Name
PV Size <20.00 GiB Allocatable NO PE Size 0
Total PE 0 Free PE 0 Allocated PE 0 PV UUID xED2qY-b0XV-8MXi-61nG-0aiV-E4qX-Sz2EpI

###########################################################################

5..1 创建 VG [root@localhost ~]# vgcreate vgGroup001 /dev/sdc1 # 创建VG。 Volume group "vgGroup001" successfully created

[root@localhost ~]# pvdisplay                                    # 查看 VG。
  --- Physical volume ---

PV Name /dev/sdc1 VG Name vgGroup001 PV Size <20.00 GiB / not usable 3.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 5119 Free PE 5119 Allocated PE 0 PV UUID xED2qY-b0XV-8MXi-61nG-0aiV-E4qX-Sz2EpI

#######################################################################

6..1 创建 LV 7.[root@localhost ~]# lvcreate -L 19G -n lvdata vgGroup001 # 创建 LV。 Logical volume "lvdata" created.

[root@localhost ~]# lvdisplay # 查看 LV. LV Path /dev/vgGroup001/lvdata LV Name lvdata VG Name vgGroup001 LV UUID jnoLUA-1vQF-sauB-PY75-kqLe-o13p-fdwK8e LV Write Access read/write LV Creation host, time localhost.localdomain, 2018-11-15 03:43:40 -0500 LV Status available

LV Size 19.00 GiB Current LE 4864 Segments 1 Allocation inherit Read ahead sectors auto

  • currently set to 8192 Block device 253:3 #########################################################################

7.1 格式化磁盘。 [root@localhost ~]# mkfs -t ext4 /dev/vgGroup001/lvdata

8.1 配置临时挂载 [root@localhost ~]# mkdir /data [root@localhost ~]# mount /dev/vgGroup001/lvdata /data/

9.1 配置开机自动挂载 [root@localhost ~]# blkid /dev/vgGroup001/lvdata # 查看磁盘UUID /dev/vgGroup001/lvdata: UUID="3c7b53fe-0178-42d1-82cb-55183cdf1a78" TYPE="ext4

9.1.1.编辑文件/etc/fstab,在文件末尾添加一行 UUID="3c7b53fe-0178-42d1-82cb-55183cdf1a78 /data ext4 defaults 0 2

参数解释: UUID=bb84333a-6a0d-4285-a14c-cf8b5da88d61:要挂载的磁盘分区的UUID /data:挂载目录 ext4:分区格式为ext4 defaults:挂载时所要设定的参数(只读,读写,启用quota等),输入defaults包括的参数有(rw、dev、exec、auto、nouser、async) 0:使用dump是否要记录,0为不需要,1为需要 2:2是开机时检查的顺序,boot系统文件为1,其他文件系统都为2,如不要检查就为0