工作需要开发的系统巡检脚本，适用于 CentOS6.x/7.x 拿出来给分享给大家，部分代码用来生成CMDB的报表数据，不喜的可以拿掉。
注意：巡检不能替代监控！
流程图
画图工具：https://www.processon.com/i/5741b4ade4b09daf02b63286
脚本代码
#!/bin/bash
#主机信息每日巡检
#version 2016.08.09
#当前脚本适用于CentOS/RedHat 6.X、7.X
#环境变量PATH没设好，在cron里执行时有很多命令会找不到
export PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
source /etc/profile
[ $(id -u) -gt 0 ] && echo "请用root用户执行此脚本！" && exit 1
#uploadHostDailyCheckApi="http://10.0.0.1:8080/api/uploadHostDailyCheck"
#uploadHostDailyCheckReportApi="http://10.0.0.1:8080/api/uploadHostDailyCheckReport"
centosVersion=$(awk '{print $(NF-1)}' /etc/redhat-release)
VERSION="2016.08.09"
#日志相关
PROGPATH=`echo $0 | sed -e 's,[\\/][^\\/][^\\/]*$,,'`
[ -f $PROGPATH ] && PROGPATH="."
LOGPATH="$PROGPATH/log"
[ -e $LOGPATH ] || mkdir $LOGPATH
RESULTFILE="$LOGPATH/HostDailyCheck-`hostname`-`date +%Y%m%d`.txt"
#定义报表的全局变量
report_DateTime="" #日期 ok
report_Hostname="" #主机名 ok
report_OSRelease="" #发行版本 ok
report_Kernel="" #内核 ok
report_Language="" #语言/编码 ok
report_LastReboot="" #最近启动时间 ok
report_Uptime="" #运行时间（天） ok
report_CPUs="" #CPU数量 ok
report_CPUType="" #CPU类型 ok
report_Arch="" #CPU架构 ok
report_MemTotal="" #内存总容量(MB) ok
report_MemFree="" #内存剩余(MB) ok
report_MemUsedPercent="" #内存使用率% ok
report_DiskTotal="" #硬盘总容量(GB) ok
report_DiskFree="" #硬盘剩余(GB) ok
report_DiskUsedPercent="" #硬盘使用率% ok
report_InodeTotal="" #Inode总量 ok
report_InodeFree="" #Inode剩余 ok
report_InodeUsedPercent="" #Inode使用率 ok
report_IP="" #IP地址 ok
report_MAC="" #MAC地址 ok
report_Gateway="" #默认网关 ok
report_DNS="" #DNS ok
report_Listen="" #监听 ok
report_Selinux="" #Selinux ok
report_Firewall="" #防火墙 ok
report_USERs="" #用户 ok
report_USEREmptyPassword="" #空密码用户 ok
report_USERTheSameUID="" #相同ID的用户 ok
report_PasswordExpiry="" #密码过期（天） ok
report_RootUser="" #root用户 ok
report_Sudoers="" #sudo授权 ok
report_SSHAuthorized="" #SSH信任主机 ok
report_SSHDProtocolVersion="" #SSH协议版本 ok
report_SSHDPermitRootLogin="" #允许root远程登录 ok
report_DefunctProsess="" #僵尸进程数量 ok
report_SelfInitiatedService="" #自启动服务数量 ok
report_SelfInitiatedProgram="" #自启动程序数量 ok
report_RuningService="" #运行中服务数 ok
report_Crontab="" #计划任务数 ok
report_Syslog="" #日志服务 ok
report_SNMP="" #SNMP OK
report_NTP="" #NTP ok
report_JDK="" #JDK版本 ok
function version(){
echo ""
echo ""
echo "系统巡检脚本：Version $VERSION"
}
function getCpuStatus(){
echo ""
echo ""
echo "############################ CPU检查 #############################"
Physical_CPUs=$(grep "physical id" /proc/cpuinfo| sort | uniq | wc -l)
Virt_CPUs=$(grep "processor" /proc/cpuinfo | wc -l)
CPU_Kernels=$(grep "cores" /proc/cpuinfo|uniq| awk -F ': ' '{print $2}')
CPU_Type=$(grep "model name" /proc/cpuinfo | awk -F ': ' '{print $2}' | sort | uniq)
CPU_Arch=$(uname -m)
echo "物理CPU个数:$Physical_CPUs"
echo "逻辑CPU个数:$Virt_CPUs"
echo "每CPU核心数:$CPU_Kernels"
echo " CPU型号:$CPU_Type"
echo " CPU架构:$CPU_Arch"
#报表信息
report_CPUs=$Virt_CPUs #CPU数量
report_CPUType=$CPU_Type #CPU类型
report_Arch=$CPU_Arch #CPU架构
}
function getMemStatus(){
echo ""
echo ""
echo "############################ 内存检查 ############################"
if [[ $centosVersion < 7 ]];then
free -mo
else
free -h
fi
#报表信息
MemTotal=$(grep MemTotal /proc/meminfo| awk '{print $2}') #KB
MemFree=$(grep MemFree /proc/meminfo| awk '{print $2}') #KB
let MemUsed=MemTotal-MemFree
MemPercent=$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf \"%.2f\",$MemUsed*100/$MemTotal}}")
report_MemTotal="$((MemTotal/1024))""MB" #内存总容量(MB)
report_MemFree="$((MemFree/1024))""MB" #内存剩余(MB)
report_MemUsedPercent="$(awk "BEGIN {if($MemTotal==0){printf 100}else{printf \"%.2f\",$MemUsed*100/$MemTotal}}")""%" #内存使用率%
}
function getDiskStatus(){
echo ""
echo ""
echo "############################ 磁盘检查 ############################"
df -hiP | sed 's/Mounted on/Mounted/'> /tmp/inode
df -hTP | sed 's/Mounted on/Mounted/'> /tmp/disk
join /tmp/disk /tmp/inode | awk '{print $1,$2,"|",$3,$4,$5,$6,"|",$8,$9,$10,$11,"|",$12}'| column -t
#报表信息
diskdata=$(df -TP | sed '1d' | awk '$2!="tmpfs"{print}') #KB
disktotal=$(echo "$diskdata" | awk '{total+=$3}END{print total}') #KB
diskused=$(echo "$diskdata" | awk '{total+=$4}END{print total}') #KB
diskfree=$((disktotal-diskused)) #KB
diskusedpercent=$(echo $disktotal $diskused | awk '{if($1==0){printf 100}else{printf "%.2f",$2*100/$1}}')
inodedata=$(df -iTP | sed '1d' | awk '$2!="tmpfs"{print}')
inodetotal=$(echo "$inodedata" | awk '{total+=$3}END{print total}')
inodeused=$(echo "$inodedata" | awk '{total+=$4}END{print total}')
inodefree=$((inodetotal-inodeused))
inodeusedpercent=$(echo $inodetotal $inodeused | awk '{if($1==0){printf 100}else{printf "%.2f",$2*100/$1}}')
report_DiskTotal=$((disktotal/1024/1024))"GB" #硬盘总容量(GB)
report_DiskFree=$((diskfree/1024/1024))"GB" #硬盘剩余(GB)
report_DiskUsedPercent="$diskusedpercent""%" #硬盘使用率%
report_InodeTotal=$((inodetotal/1000))"K" #Inode总量
report_InodeFree=$((inodefree/1000))"K" #Inode剩余
report_InodeUsedPercent="$inodeusedpercent""%" #Inode使用率%
}
function getSystemStatus(){
echo ""
echo ""
echo "############################ 系统检查 ############################"
if [ -e /etc/sysconfig/i18n ];then
default_LANG="$(grep "LANG=" /etc/sysconfig/i18n | grep -v "^#" | awk -F '"' '{print $2}')"
else
default_LANG=$LANG
fi
export LANG="en_US.UTF-8"
Release=$(cat /etc/redhat-release 2>/dev/null)
Kernel=$(uname -r)
OS=$(uname -o)
Hostname=$(uname -n)
SELinux=$(/usr/sbin/sestatus | grep "SELinux status: " | awk '{print $3}')
LastReboot=$(who -b | awk '{print $3,$4}')
uptime=$(uptime | sed 's/.*up \([^,]*\), .*/\1/')
echo " 系统：$OS"
echo " 发行版本：$Release"
echo " 内核：$Kernel"
echo " 主机名：$Hostname"
echo " SELinux：$SELinux"
echo "语言/编码：$default_LANG"
echo " 当前时间：$(date +'%F %T')"
echo " 最后启动：$LastReboot"
echo " 运行时间：$uptime"
#报表信息
report_DateTime=$(date +"%F %T") #日期
report_Hostname="$Hostname" #主机名
report_OSRelease="$Release" #发行版本
report_Kernel="$Kernel" #内核
report_Language="$default_LANG" #语言/编码
report_LastReboot="$LastReboot" #最近启动时间
report_Uptime="$uptime" #运行时间（天）
report_Selinux="$SELinux"
export LANG="$default_LANG"
}
function getServiceStatus(){
echo ""
echo ""
echo "############################ 服务检查 ############################"
echo ""
if [[ $centosVersion > 7 ]];then
conf=$(systemctl list-unit-files --type=service --state=enabled --no-pager | grep "enabled")
process=$(systemctl list-units --type=service --state=running --no-pager | grep ".service")
#报表信息
report_SelfInitiatedService="$(echo "$conf" | wc -l)" #自启动服务数量
report_RuningService="$(echo "$process" | wc -l)" #运行中服务数量
else
conf=$(/sbin/chkconfig | grep -E ":on|:启用")
process=$(/sbin/service --status-all 2>/dev/null | grep -E "is running|正在运行")
#报表信息
report_SelfInitiatedService="$(echo "$conf" | wc -l)" #自启动服务数量
report_RuningService="$(echo "$process" | wc -l)" #运行中服务数量
fi
echo "服务配置"
echo "--------"
echo "$conf" | column -t
echo ""
echo "正在运行的服务"
echo "--------------"
echo "$process"
}
function getAutoStartStatus(){
echo ""
echo ""
echo "############################ 自启动检查 ##########################"
conf=$(grep -v "^#" /etc/rc.d/rc.local| sed '/^$/d')
echo "$conf"
#报表信息
report_SelfInitiatedProgram="$(echo $conf | wc -l)" #自启动程序数量
}
function getLoginStatus(){
echo ""
echo ""
echo "############################ 登录检查 ############################"
last | head
}
function getNetworkStatus(){
echo ""
echo ""
echo "############################ 网络检查 ############################"
if [[ $centosVersion < 7 ]];then
/sbin/ifconfig -a | grep -v packets | grep -v collisions | grep -v inet6
else
#ip a
for i in $(ip link | grep BROADCAST | awk -F: '{print $2}');do ip add show $i | grep -E "BROADCAST|global"| awk '{print $2}' | tr '\n' ' ' ;echo "" ;done
fi
GATEWAY=$(ip route | grep default | awk '{print $3}')
DNS=$(grep nameserver /etc/resolv.conf| grep -v "#" | awk '{print $2}' | tr '\n' ',' | sed 's/,$//')
echo ""
echo "网关：$GATEWAY "
echo " DNS：$DNS"
#报表信息
IP=$(ip -f inet addr | grep -v 127.0.0.1 | grep inet | awk '{print $NF,$2}' | tr '\n' ',' | sed 's/,$//')
MAC=$(ip link | grep -v "LOOPBACK\|loopback" | awk '{print $2}' | sed 'N;s/\n//' | tr '\n' ',' | sed 's/,$//')
report_IP="$IP" #IP地址
report_MAC=$MAC #MAC地址
report_Gateway="$GATEWAY" #默认网关
report_DNS="$DNS" #DNS
}
function getListenStatus(){
echo ""
echo ""
echo "############################ 监听检查 ############################"
TCPListen=$(ss -ntul | column -t)
echo "$TCPListen"
#报表信息
report_Listen="$(echo "$TCPListen"| sed '1d' | awk '/tcp/ {print $5}' | awk -F: '{print $NF}' | sort | uniq | wc -l)"
}
function getCronStatus(){
echo ""
echo ""
echo "############################ 计划任务检查 ########################"
Crontab=0
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for user in $(grep "$shell" /etc/passwd| awk -F: '{print $1}');do
crontab -l -u $user >/dev/null 2>&1
status=$?
if [ $status -eq 0 ];then
echo "$user"
echo "--------"
crontab -l -u $user
let Crontab=Crontab+$(crontab -l -u $user | wc -l)
echo ""
fi
done
done
#计划任务
find /etc/cron* -type f | xargs -i ls -l {} | column -t
let Crontab=Crontab+$(find /etc/cron* -type f | wc -l)
#报表信息
report_Crontab="$Crontab" #计划任务数
}
function getHowLongAgo(){
# 计算一个时间戳离现在有多久了
datetime="$*"
[ -z "$datetime" ] && echo "错误的参数：getHowLongAgo() $*"
Timestamp=$(date +%s -d "$datetime") #转化为时间戳
Now_Timestamp=$(date +%s)
Difference_Timestamp=$(($Now_Timestamp-$Timestamp))
days=0;hours=0;minutes=0;
sec_in_day=$((60*60*24));
sec_in_hour=$((60*60));
sec_in_minute=60
while (( $(($Difference_Timestamp-$sec_in_day)) > 1 ))
do
let Difference_Timestamp=Difference_Timestamp-sec_in_day
let days++
done
while (( $(($Difference_Timestamp-$sec_in_hour)) > 1 ))
do
let Difference_Timestamp=Difference_Timestamp-sec_in_hour
let hours++
done
echo "$days 天 $hours 小时前"
}
function getUserLastLogin(){
# 获取用户最近一次登录的时间，含年份
# 很遗憾last命令不支持显示年份，只有"last -t YYYYMMDDHHMMSS"表示某个时间之间的登录，我
# 们只能用最笨的方法了，对比今天之前和今年元旦之前（或者去年之前和前年之前……）某个用户
# 登录次数，如果登录统计次数有变化，则说明最近一次登录是今年。
username=$1
: ${username:="`whoami`"}
thisYear=$(date +%Y)
oldesYear=$(last | tail -n1 | awk '{print $NF}')
while(( $thisYear >= $oldesYear));do
loginBeforeToday=$(last $username | grep $username | wc -l)
loginBeforeNewYearsDayOfThisYear=$(last $username -t $thisYear"0101000000" | grep $username | wc -l)
if [ $loginBeforeToday -eq 0 ];then
echo "从未登录过"
break
elif [ $loginBeforeToday -gt $loginBeforeNewYearsDayOfThisYear ];then
lastDateTime=$(last -i $username | head -n1 | awk '{for(i=4;i<(NF-2);i++)printf"%s ",$i}')" $thisYear" #格式如: Sat Nov 2 20:33 2015
lastDateTime=$(date "+%Y-%m-%d %H:%M:%S" -d "$lastDateTime")
echo "$lastDateTime"
break
else
thisYear=$((thisYear-1))
fi
done
}
function getUserStatus(){
echo ""
echo ""
echo "############################ 用户检查 ############################"
#/etc/passwd 最后修改时间
pwdfile="$(cat /etc/passwd)"
Modify=$(stat /etc/passwd | grep Modify | tr '.' ' ' | awk '{print $2,$3}')
echo "/etc/passwd 最后修改时间：$Modify ($(getHowLongAgo $Modify))"
echo ""
echo "特权用户"
echo "--------"
RootUser=""
for user in $(echo "$pwdfile" | awk -F: '{print $1}');do
if [ $(id -u $user) -eq 0 ];then
echo "$user"
RootUser="$RootUser,$user"
fi
done
echo ""
echo "用户列表"
echo "--------"
USERs=0
echo "$(
echo "用户名 UID GID HOME SHELL 最后一次登录"
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for username in $(grep "$shell" /etc/passwd| awk -F: '{print $1}');do
userLastLogin="$(getUserLastLogin $username)"
echo "$pwdfile" | grep -w "$username" |grep -w "$shell"| awk -F: -v lastlogin="$(echo "$userLastLogin" | tr ' ' '_')" '{print $1,$3,$4,$6,$7,lastlogin}'
done
let USERs=USERs+$(echo "$pwdfile" | grep "$shell"| wc -l)
done
)" | column -t
echo ""
echo "空密码用户"
echo "----------"
USEREmptyPassword=""
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for user in $(echo "$pwdfile" | grep "$shell" | cut -d: -f1);do
r=$(awk -F: '$2=="!!"{print $1}' /etc/shadow | grep -w $user)
if [ ! -z $r ];then
echo $r
USEREmptyPassword="$USEREmptyPassword,"$r
fi
done
done
echo ""
echo "相同ID的用户"
echo "------------"
USERTheSameUID=""
UIDs=$(cut -d: -f3 /etc/passwd | sort | uniq -c | awk '$1>1{print $2}')
for uid in $UIDs;do
echo -n "$uid";
USERTheSameUID="$uid"
r=$(awk -F: 'ORS="";$3=='"$uid"'{print ":",$1}' /etc/passwd)
echo "$r"
echo ""
USERTheSameUID="$USERTheSameUID $r,"
done
#报表信息
report_USERs="$USERs" #用户
report_USEREmptyPassword=$(echo $USEREmptyPassword | sed 's/^,//')
report_USERTheSameUID=$(echo $USERTheSameUID | sed 's/,$//')
report_RootUser=$(echo $RootUser | sed 's/^,//') #特权用户
}
function getPasswordStatus {
echo ""
echo ""
echo "############################ 密码检查 ############################"
pwdfile="$(cat /etc/passwd)"
echo ""
echo "密码过期检查"
echo "------------"
result=""
for shell in $(grep -v "/sbin/nologin" /etc/shells);do
for user in $(echo "$pwdfile" | grep "$shell" | cut -d: -f1);do
get_expiry_date=$(/usr/bin/chage -l $user | grep 'Password expires' | cut -d: -f2)
if [[ $get_expiry_date = ' never' || $get_expiry_date = 'never' ]];then
printf "%-15s 永不过期\n" $user
result="$result,$user:never"
else
password_expiry_date=$(date -d "$get_expiry_date" "+%s")
current_date=$(date "+%s")
diff=$(($password_expiry_date-$current_date))
let DAYS=$(($diff/(60*60*24)))
printf "%-15s %s天后过期\n" $user $DAYS
result="$result,$user:$DAYS days"
fi
done
done
report_PasswordExpiry=$(echo $result | sed 's/^,//')
echo ""
echo "密码策略检查"
echo "------------"
grep -v "#" /etc/login.defs | grep -E "PASS_MAX_DAYS|PASS_MIN_DAYS|PASS_MIN_LEN|PASS_WARN_AGE"
}
function getSudoersStatus(){
echo ""
echo ""
echo "############################ Sudoers检查 #########################"
conf=$(grep -v "^#" /etc/sudoers| grep -v "^Defaults" | sed '/^$/d')
echo "$conf"
echo ""
#报表信息
report_Sudoers="$(echo $conf | wc -l)"
}
function getInstalledStatus(){
echo ""
echo ""
echo "############################ 软件检查 ############################"
rpm -qa --last | head | column -t
}
function getProcessStatus(){
echo ""
echo ""
echo "############################ 进程检查 ############################"
if [ $(ps -ef | grep defunct | grep -v grep | wc -l) -ge 1 ];then
echo ""
echo "僵尸进程";
echo "--------"
ps -ef | head -n1
ps -ef | grep defunct | grep -v grep
fi
echo ""
echo "内存占用TOP10"
echo "-------------"
echo -e "PID %MEM RSS COMMAND
$(ps aux | awk '{print $2, $4, $6, $11}' | sort -k3rn | head -n 10 )"| column -t
echo ""
echo "CPU占用TOP10"
echo "------------"
top b -n1 | head -17 | tail -11
#报表信息
report_DefunctProsess="$(ps -ef | grep defunct | grep -v grep|wc -l)"
}
function getJDKStatus(){
echo ""
echo ""
echo "############################ JDK检查 #############################"
java -version 2>/dev/null
if [ $? -eq 0 ];then
java -version 2>&1
fi
echo "JAVA_HOME=\"$JAVA_HOME\""
#报表信息
report_JDK="$(java -version 2>&1 | grep version | awk '{print $1,$3}' | tr -d '"')"
}
function getSyslogStatus(){
echo ""
echo ""
echo "############################ syslog检查 ##########################"
echo "服务状态：$(getState rsyslog)"
echo ""
echo "/etc/rsyslog.conf"
echo "-----------------"
cat /etc/rsyslog.conf 2>/dev/null | grep -v "^#" | grep -v "^\\$" | sed '/^$/d' | column -t
#报表信息
report_Syslog="$(getState rsyslog)"
}
function getFirewallStatus(){
echo ""
echo ""
echo "############################ 防火墙检查 ##########################"
#防火墙状态，策略等
if [[ $centosVersion < 7 ]];then
/etc/init.d/iptables status >/dev/null 2>&1
status=$?
if [ $status -eq 0 ];then
s="active"
elif [ $status -eq 3 ];then
s="inactive"
elif [ $status -eq 4 ];then
s="permission denied"
else
s="unknown"
fi
else
s="$(getState iptables)"
fi
echo "iptables: $s"
echo ""
echo "/etc/sysconfig/iptables"
echo "-----------------------"
cat /etc/sysconfig/iptables 2>/dev/null
#报表信息
report_Firewall="$s"
}
function getSNMPStatus(){
#SNMP服务状态，配置等
echo ""
echo ""
echo "############################ SNMP检查 ############################"
status="$(getState snmpd)"
echo "服务状态：$status"
echo ""
if [ -e /etc/snmp/snmpd.conf ];then
echo "/etc/snmp/snmpd.conf"
echo "--------------------"
cat /etc/snmp/snmpd.conf 2>/dev/null | grep -v "^#" | sed '/^$/d'
fi
#报表信息
report_SNMP="$(getState snmpd)"
}
function getState(){
if [[ $centosVersion < 7 ]];then
if [ -e "/etc/init.d/$1" ];then
if [ `/etc/init.d/$1 status 2>/dev/null | grep -E "is running|正在运行" | wc -l` -ge 1 ];then
r="active"
else
r="inactive"
fi
else
r="unknown"
fi
else
#CentOS 7+
r="$(systemctl is-active $1 2>&1)"
fi
echo "$r"
}
function getSSHStatus(){
#SSHD服务状态，配置,受信任主机等
echo ""
echo ""
echo "############################ SSH检查 #############################"
#检查受信任主机
pwdfile="$(cat /etc/passwd)"
echo "服务状态：$(getState sshd)"
Protocol_Version=$(cat /etc/ssh/sshd_config | grep Protocol | awk '{print $2}')
echo "SSH协议版本：$Protocol_Version"
echo ""
echo "信任主机"
echo "--------"
authorized=0
for user in $(echo "$pwdfile" | grep /bin/bash | awk -F: '{print $1}');do
authorize_file=$(echo "$pwdfile" | grep -w $user | awk -F: '{printf $6"/.ssh/authorized_keys"}')
authorized_host=$(cat $authorize_file 2>/dev/null | awk '{print $3}' | tr '\n' ',' | sed 's/,$//')
if [ ! -z $authorized_host ];then
echo "$user 授权 \"$authorized_host\" 无密码访问"
fi
let authorized=authorized+$(cat $authorize_file 2>/dev/null | awk '{print $3}'|wc -l)
done
echo ""
echo "是否允许ROOT远程登录"
echo "--------------------"
config=$(cat /etc/ssh/sshd_config | grep PermitRootLogin)
firstChar=${config:0:1}
if [ $firstChar == "#" ];then
PermitRootLogin="yes" #默认是允许ROOT远程登录的
else
PermitRootLogin=$(echo $config | awk '{print $2}')
fi
echo "PermitRootLogin $PermitRootLogin"
echo ""
echo "/etc/ssh/sshd_config"
echo "--------------------"
cat /etc/ssh/sshd_config | grep -v "^#" | sed '/^$/d'
#报表信息
report_SSHAuthorized="$authorized" #SSH信任主机
report_SSHDProtocolVersion="$Protocol_Version" #SSH协议版本
report_SSHDPermitRootLogin="$PermitRootLogin" #允许root远程登录
}
function getNTPStatus(){
#NTP服务状态，当前时间，配置等
echo ""
echo ""
echo "############################ NTP检查 #############################"
if [ -e /etc/ntp.conf ];then
echo "服务状态：$(getState ntpd)"
echo ""
echo "/etc/ntp.conf"
echo "-------------"
cat /etc/ntp.conf 2>/dev/null | grep -v "^#" | sed '/^$/d'
fi
#报表信息
report_NTP="$(getState ntpd)"
}
function uploadHostDailyCheckReport(){
json="{
\"DateTime\":\"$report_DateTime\",
\"Hostname\":\"$report_Hostname\",
\"OSRelease\":\"$report_OSRelease\",
\"Kernel\":\"$report_Kernel\",
\"Language\":\"$report_Language\",
\"LastReboot\":\"$report_LastReboot\",
\"Uptime\":\"$report_Uptime\",
\"CPUs\":\"$report_CPUs\",
\"CPUType\":\"$report_CPUType\",
\"Arch\":\"$report_Arch\",
\"MemTotal\":\"$report_MemTotal\",
\"MemFree\":\"$report_MemFree\",
\"MemUsedPercent\":\"$report_MemUsedPercent\",
\"DiskTotal\":\"$report_DiskTotal\",
\"DiskFree\":\"$report_DiskFree\",
\"DiskUsedPercent\":\"$report_DiskUsedPercent\",
\"InodeTotal\":\"$report_InodeTotal\",
\"InodeFree\":\"$report_InodeFree\",
\"InodeUsedPercent\":\"$report_InodeUsedPercent\",
\"IP\":\"$report_IP\",
\"MAC\":\"$report_MAC\",
\"Gateway\":\"$report_Gateway\",
\"DNS\":\"$report_DNS\",
\"Listen\":\"$report_Listen\",
\"Selinux\":\"$report_Selinux\",
\"Firewall\":\"$report_Firewall\",
\"USERs\":\"$report_USERs\",
\"USEREmptyPassword\":\"$report_USEREmptyPassword\",
\"USERTheSameUID\":\"$report_USERTheSameUID\",
\"PasswordExpiry\":\"$report_PasswordExpiry\",
\"RootUser\":\"$report_RootUser\",
\"Sudoers\":\"$report_Sudoers\",
\"SSHAuthorized\":\"$report_SSHAuthorized\",
\"SSHDProtocolVersion\":\"$report_SSHDProtocolVersion\",
\"SSHDPermitRootLogin\":\"$report_SSHDPermitRootLogin\",
\"DefunctProsess\":\"$report_DefunctProsess\",
\"SelfInitiatedService\":\"$report_SelfInitiatedService\",
\"SelfInitiatedProgram\":\"$report_SelfInitiatedProgram\",
\"RuningService\":\"$report_RuningService\",
\"Crontab\":\"$report_Crontab\",
\"Syslog\":\"$report_Syslog\",
\"SNMP\":\"$report_SNMP\",
\"NTP\":\"$report_NTP\",
\"JDK\":\"$report_JDK\"
}"
#echo "$json"
curl -l -H "Content-type: application/json" -X POST -d "$json" "$uploadHostDailyCheckReportApi" 2>/dev/null
}
function check(){
version
getSystemStatus
getCpuStatus
getMemStatus
getDiskStatus
getNetworkStatus
getListenStatus
getProcessStatus
getServiceStatus
getAutoStartStatus
getLoginStatus
getCronStatus
getUserStatus
getPasswordStatus
getSudoersStatus
getJDKStatus
getFirewallStatus
getSSHStatus
getSyslogStatus
getSNMPStatus
getNTPStatus
getInstalledStatus
}
#执行检查并保存检查结果
check > $RESULTFILE
echo "检查结果：$RESULTFILE"
#上传检查结果的文件
#curl -F "filename=@$RESULTFILE" "$uploadHostDailyCheckApi" 2>/dev/null
#上传检查结果的报表
#uploadHostDailyCheckReport 1>/dev/null运行结果
[root@localhost ~]# ./HostDailyCheck.sh 检查结果：./log/HostDailyCheck-localhost.localdomain-20160810.txt
巡检报告样本
系统巡检脚本：Version 2016.08.09 ############################ 系统检查 ############################ 系统：GNU/Linux 发行版本：CentOS Linux release 7.2.1511 (Core) 内核：3.10.0-327.el7.x86_64 主机名：localhost.localdomain SELinux：enabled 语言/编码：en_US.UTF-8 当前时间：2016-08-10 01:16:38 最后启动：2016-08-09 00:40 运行时间：1 day ############################ CPU检查 ############################# 物理CPU个数:1 逻辑CPU个数:1 每CPU核心数:1 CPU型号:Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz CPU架构:x86_64 ############################ 内存检查 ############################ total used free shared buff/cache available Mem: 1.9G 138M 343M 8.6M 1.5G 1.6G Swap: 2.0G 0B 2.0G ############################ 磁盘检查 ############################ Filesystem Type | Size Used Avail Use% | Inodes IUsed IFree IUse% | Mounted /dev/mapper/centos-root xfs | 18G 1.6G 16G 9% | 18M 24K 18M 1% | / devtmpfs devtmpfs | 983M 0 983M 0% | 246K 381 246K 1% | /dev tmpfs tmpfs | 993M 0 993M 0% | 249K 1 249K 1% | /dev/shm tmpfs tmpfs | 993M 0 993M 0% | 249K 485 248K 1% | /run tmpfs tmpfs | 993M 0 993M 0% | 249K 13 249K 1% | /sys/fs/cgroup tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 1 249K 1% | /dev/shm tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 485 248K 1% | /run tmpfs tmpfs | 993M 8.6M 985M 1% | 249K 13 249K 1% | /sys/fs/cgroup tmpfs tmpfs | 993M 0 993M 0% | 249K 1 249K 1% | /dev/shm tmpfs tmpfs | 993M 0 993M 0% | 249K 485 248K 1% | /run tmpfs tmpfs | 993M 0 993M 0% | 249K 13 249K 1% | /sys/fs/cgroup /dev/sda1 xfs | 497M 107M 391M 22% | 500K 329 500K 1% | /boot tmpfs tmpfs | 199M 0 199M 0% | 249K 1 249K 1% | /run/user/0 /dev/loop0 iso9660 | 603M 603M 0 100% | 0 0 0 - | /var/ftp/pub ############################ 网络检查 ############################ eno16777736: 192.168.100.63/24 192.168.100.68/24 网关：192.168.100.2 DNS：192.168.100.2 ############################ 监听检查 ############################ Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port udp UNCONN 0 0 *:14034 *:* udp UNCONN 0 0 *:46966 *:* udp UNCONN 0 0 *:67 *:* udp UNCONN 0 0 *:68 *:* udp UNCONN 0 0 *:69 *:* udp UNCONN 0 0 :::46966 :::* udp UNCONN 0 0 :::32833 :::* tcp LISTEN 0 128 *:22 *:* tcp LISTEN 0 100 127.0.0.1:25 *:* tcp LISTEN 0 32 :::21 :::* tcp LISTEN 0 128 :::22 :::* tcp LISTEN 0 100 ::1:25 :::* ############################ 进程检查 ############################ 内存占用TOP10 ------------- PID %MEM RSS COMMAND 10069 0.9 18612 /usr/sbin/dhcpd 1212 0.8 16396 /usr/bin/python 10036 0.7 15800 /sbin/dhclient 992 0.5 11992 /usr/lib/polkit-1/polkitd 962 0.4 8232 /usr/sbin/NetworkManager 1 0.3 7208 /usr/lib/systemd/systemd 969 0.2 5320 /usr/sbin/rsyslogd 10196 0.2 5076 sshd: 10175 0.2 5072 sshd: 810 0.2 4996 /usr/lib/systemd/systemd-journald CPU占用TOP10 ------------ PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10638 root 20 0 146272 2164 1352 R 6.2 0.1 0:00.01 top 1 root 20 0 44496 7208 2612 S 0.0 0.4 0:03.83 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.67 ksoftirqd/0 7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh 9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/0 10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/1 11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/2 12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/3 ############################ 服务检查 ############################ 服务配置 -------- auditd.service enabled crond.service enabled dbus-org.freedesktop.NetworkManager.service enabled dbus-org.freedesktop.nm-dispatcher.service enabled dhcpd.service enabled getty@.service enabled irqbalance.service enabled lvm2-monitor.service enabled microcode.service enabled NetworkManager-dispatcher.service enabled NetworkManager.service enabled postfix.service enabled rsyslog.service enabled sshd.service enabled systemd-readahead-collect.service enabled systemd-readahead-drop.service enabled systemd-readahead-replay.service enabled tuned.service enabled vsftpd.service enabled xinetd.service enabled 正在运行的服务 -------------- auditd.service loaded active running Security Auditing Service crond.service loaded active running Command Scheduler dbus.service loaded active running D-Bus System Message Bus dhcpd.service loaded active running DHCPv4 Server Daemon getty@tty1.service loaded active running Getty on tty1 lvm2-lvmetad.service loaded active running LVM2 metadata daemon NetworkManager.service loaded active running Network Manager polkit.service loaded active running Authorization Manager postfix.service loaded active running Postfix Mail Transport Agent rsyslog.service loaded active running System Logging Service sshd.service loaded active running OpenSSH server daemon systemd-journald.service loaded active running Journal Service systemd-logind.service loaded active running Login Service systemd-udevd.service loaded active running udev Kernel Device Manager tuned.service loaded active running Dynamic System Tuning Daemon vsftpd.service loaded active running Vsftpd ftp daemon wpa_supplicant.service loaded active running WPA Supplicant daemon xinetd.service loaded active running Xinetd A Powerful Replacement For Inetd ############################ 自启动检查 ########################## touch /var/lock/subsys/local ############################ 登录检查 ############################ root pts/0 192.168.100.1 Tue Aug 9 23:47 still logged in root pts/1 192.168.100.1 Tue Aug 9 23:46 still logged in root pts/0 192.168.100.1 Tue Aug 9 23:45 - 23:46 (00:00) root pts/0 192.168.100.1 Tue Aug 9 16:46 - 23:45 (06:59) root tty1 Tue Aug 9 00:40 still logged in reboot system boot 3.10.0-327.el7.x Tue Aug 9 00:40 - 01:16 (1+00:35) wtmp begins Tue Aug 9 00:40:43 2016 ############################ 计划任务检查 ######################## -rw-r--r--. 1 root root 128 Jul 27 2015 /etc/cron.d/0hourly -rwx------. 1 root root 180 Jul 31 2013 /etc/cron.daily/logrotate -rwxr-xr-x. 1 root root 332 Dec 3 2015 /etc/cron.daily/0yum-daily.cron -rwxr-xr-x. 1 root root 618 Mar 18 2014 /etc/cron.daily/man-db.cron -rw-------. 1 root root 0 Jul 27 2015 /etc/cron.deny -rwxr-xr-x. 1 root root 362 Dec 3 2015 /etc/cron.hourly/0yum-hourly.cron -rwxr-xr-x. 1 root root 392 Jul 27 2015 /etc/cron.hourly/0anacron -rw-r--r--. 1 root root 451 Jun 10 2014 /etc/crontab ############################ 用户检查 ############################ /etc/passwd 最后修改时间：2016-08-09 16:47:13 (0 天 8 小时前) 特权用户 -------- root 用户列表 -------- 用户名 UID GID HOME SHELL 最后一次登录 root 0 0 /root /bin/bash 2016-08-09_23:47:00 空密码用户 ---------- 相同ID的用户 ------------ ############################ 密码检查 ############################ 密码过期检查 ------------ root 永不过期 密码策略检查 ------------ PASS_MAX_DAYS 99999 PASS_MIN_DAYS 0 PASS_MIN_LEN 5 PASS_WARN_AGE 7 ############################ Sudoers检查 ######################### root ALL=(ALL) ALL %wheel ALL=(ALL) ALL ############################ JDK检查 ############################# JAVA_HOME="" ############################ 防火墙检查 ########################## iptables: inactive /etc/sysconfig/iptables ----------------------- ############################ SSH检查 ############################# 服务状态：active SSH协议版本：2 信任主机 -------- 是否允许ROOT远程登录 -------------------- PermitRootLogin yes /etc/ssh/sshd_config -------------------- HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_ecdsa_key HostKey /etc/ssh/ssh_host_ed25519_key SyslogFacility AUTHPRIV AuthorizedKeysFile .ssh/authorized_keys PasswordAuthentication yes ChallengeResponseAuthentication no GSSAPIAuthentication yes GSSAPICleanupCredentials no UsePAM yes X11Forwarding yes UsePrivilegeSeparation sandbox # Default for new installations. AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE AcceptEnv XMODIFIERS Subsystem sftp /usr/libexec/openssh/sftp-server ############################ syslog检查 ########################## 服务状态：active /etc/rsyslog.conf ----------------- *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg :omusrmsg:* uucp,news.crit /var/log/spooler local7.* /var/log/boot.log ############################ SNMP检查 ############################ 服务状态：unknown ############################ NTP检查 ############################# ############################ 软件检查 ############################ telnet-0.17-59.el7.x86_64 Tue 09 Aug 2016 11:43:37 PM CST syslinux-tftpboot-4.05-12.el7.x86_64 Tue 09 Aug 2016 05:26:19 PM CST syslinux-4.05-12.el7.x86_64 Tue 09 Aug 2016 05:26:19 PM CST mtools-4.0.18-5.el7.x86_64 Tue 09 Aug 2016 05:26:18 PM CST ftp-0.17-66.el7.x86_64 Tue 09 Aug 2016 05:05:47 PM CST tftp-server-5.2-12.el7.x86_64 Tue 09 Aug 2016 04:54:30 PM CST tftp-5.2-12.el7.x86_64 Tue 09 Aug 2016 04:54:30 PM CST xinetd-2.3.15-12.el7.x86_64 Tue 09 Aug 2016 04:54:24 PM CST vsftpd-3.0.2-11.el7_2.x86_64 Tue 09 Aug 2016 04:50:36 PM CST gpg-pubkey-f4a80eb5-53a7ff4b Tue 09 Aug 2016 04:47:13 PM CST
欢迎拍砖和交流！
