R1:

*****************************************************************************************************

<H3C>sys    
System View: return to User View with Ctrl+Z.

进入视图模式

[H3C]sysname H3C-R1

更改计算机名

[H3C-R1]interface e0/0/0

进入接口模式

[H3C-R1-Ethernet0/0/0]ip add 1.1.1.1 255.255.255.0

配置IP地址及子网掩码

[H3C-R1-Ethernet0/0/0]undo sh  
Interface Ethernet0/0/0 is not shut down

开启接口

[H3C-R1-Ethernet0/0/0]quit

退出接口模式

[H3C-R1]ftp server enable

开启ftp服务

[H3C-R1]local-user ftp  
New local user added.

创建ftp用户

[H3C-R1-luser-ftp]password simple cisco

设置ftp密码

[H3C-R1-luser-ftp]service-type ftp

指定用户用于服务类型

[H3C-R1-luser-ftp]authorization-attribute level 3

开启ftp帐号的最高权限  否则只可以下载  不可以上传

[H3C-R1-luser-ftp]quit

退出用户设置模式

*****************************************************************************************************

R2:

*****************************************************************************************************

<H3C>sys    
System View: return to User View with Ctrl+Z.

进入视图模式

[H3C]sysname H3C-R2

更改计算机名

[H3C-R2]interface e0/0/0

进入接口模式

[H3C-R2-Ethernet0/0/0]ip add 1.1.1.2 255.255.255.0

设置ip地址

[H3C-R2-Ethernet0/0/0]undo sh  
Interface Ethernet0/0/0 is not shut down

开启接口

[H3C-R2-Ethernet0/0/0]ping 1.1.1.1  
 PING 1.1.1.1: 56  data bytes, press CTRL_C to break    
   Reply from 1.1.1.1: bytes=56 Sequence=1 ttl=255 time=20 ms    
   Reply from 1.1.1.1: bytes=56 Sequence=2 ttl=255 time=1 ms    
   Reply from 1.1.1.1: bytes=56 Sequence=3 ttl=255 time=4 ms    
   Request time out    
   Reply from 1.1.1.1: bytes=56 Sequence=5 ttl=255 time=4 ms

 --- 1.1.1.1 ping statistics ---  
   5 packet(s) transmitted    
   4 packet(s) received    
   20.00% packet loss    
   round-trip min/avg/max = 1/7/20 ms

测试连通性

[H3C-R2-Ethernet0/0/0]return

回到用户模式

<H3C-R2>ftp 1.1.1.1  
Trying 1.1.1.1 ...    
Press CTRL+K to abort    
Connected to 1.1.1.1.    
220 FTP service ready.    
User(1.1.1.1:(none)):ftp    
331 Password required for ftp.    
Password:    
230 User logged in.

登录用户

[ftp]dir  
227 Entering Passive Mode (1,1,1,1,4,1).    
125 ASCII mode data connection already open, transfer starting for /*.    
drwxrwxrwx   1 noone    nogroup         0 Jun 04 15:16 logfile    
drwxrwxrwx   1 noone    nogroup         0 Jun 05 13:54 diaglog    
-rwxrwxrwx   1 noone    nogroup      1477 Jun 05 14:25 startup.cfg    
-rwxrwxrwx   1 noone    nogroup      6419 Jun 05 14:05 system.xml    
-rwxrwxrwx   1 noone    nogroup      8646 Jun 05 14:05 config.cwmp    
226 Transfer complete.    
FTP: 331 byte(s) received in 0.160 second(s), 2.00K byte(s)/sec.

查看内容