实验环境设备C3691
R1#show ip interface
FastEthernet0/0 is administratively down,line protocol is down
Internet protocol processing disabled
FastEthernet0/1 is administratively down,line protocol is down
Internet protocol processing disabled
R1#config
Configuring from terminal, memory, ornetwork [terminal]?
Enter configuration commands, one perline. End with CNTL/Z.
R1(config)#interface f0/0
R1(config-if)#ip address 192.168.1.1255.255.255.0
R1(config-if)#end
R1#show ?
R1#?
R1#tunnel ?
WORD Address or hostname of a remote system
R1#config
Configuring from terminal, memory, ornetwork [terminal]?
Enter configuration commands, one perline. End with CNTL/Z.
R1(config)#
R1(config)#interface ?
R1(config)#interface port-channel ?
<1-64> Port-channelinterface number
R1(config)#interface port-channel 1
R1(config-if)#?
R1(config-if)#ip address 192.168.23.1 ?
A.B.C.D IP subnet mask
R1(config-if)#ip address 192.168.23.1255.255.255.0
R1(config-if)#?
R1(config-if)#exit
R1(config)#interface range ?
FastEthernet FastEthernet IEEE802.3
Port-channel Ethernet Channel ofinterfaces
macro macro keyword
R1(config)#interface range f ?
<0-6> FastEthernetinterface number
R1(config)#interface range f0?
/
R1(config)#interface range f0/1?
. : <0-1>
R1(config)#interface range f0/0 ?
, comma
- hyphen
<cr>
R1(config)#interface range f0/0 - ?
<1-1005> last portnumber or vlan interface in port-range
FastEthernet FastEthernet IEEE802.3
Port-channel Ethernet Channel ofinterfaces
R1(config)#interface range f0/0 - 1
R1(config-if-range)#?
R1(config-if-range)#channel-group ?
<1-64> Channel group number
R1(config-if-range)#channel-group 1 ?
<cr>
R1(config-if-range)#channel-group 1
Error: The Etherchannel members can nothave IP address
R1(config-if-range)#no ip address
R1(config-if-range)#channel-group 1
Interface already configured inPort-Channel-1.
R1(config-if-range)# end
R1#copy running start
R1#show runn inter port 1
Building configuration...
Current configuration : 89 bytes
!
interface Port-channel1
ipaddress 192.168.23.1 255.255.255.0
hold-queue 300 in
end
对端设备的配置
R2#config
Configuring from terminal, memory, ornetwork [terminal]?
Enter configuration commands, one perline. End with CNTL/Z.
R2(config)#inter por 1
R2(config-if)#ip add 192.168.23.2255.255.255.0
R2(config-if)#exit
R2(config)#interface range f0/0 - 1
R2(config-if-range)#no ip address
R2(config-if-range)#channel-group 1
R2(config-if-range)#exit
R2(config)#end
R2#copy runn sta
Destination filename [startup-config]?
Warning: Attempting to overwrite an NVRAMconfiguration previously written
by a different version of the system p_w_picpath.
Overwrite the previous NVRAMconfiguration?[confirm]
Building configuration...
[OK]
R2#show runn ?
brief configuration withoutcertificate data
class-map Show class-mapinformation
full full configuration
interface Show interfaceconfiguration
linenum Display line numbersin output
map-class Show map classinformation
policy-map Show policy-mapinformation
| Output modifiers
<cr>
R2#show runn inter port-channel 1
Building configuration...
Current configuration : 89 bytes
!
interface Port-channel1
ipaddress 192.168.23.2 255.255.255.0
hold-queue 300 in
end
R2#
