在写一个培训ppt的时候，为了深入理解buffe busy waits这个等待事件，做了一个仔细的测试，对大家也有帮助，经过测试，发现我个人以前的认识都有一点问题。大家一起探讨！
1. 创建测试表
www.killdb.com>conn roger/roger
Connected.
www.killdb.com>create table t_buffer_busy_waits as select * from dba_objects where rownum < 10000;
Table created.
www.killdb.com> create index t on t_buffer_busy_waits(object_id);
Index created.
www.killdb.com>select dbms_rowid.rowid_relative_fno(rowid) fn#,
2 dbms_rowid.rowid_block_number(rowid) blk#,
3 object_id
4 from t_buffer_busy_waits
5 where object_id = 100
6 /
FN# BLK# OBJECT_ID
---------- ---------- ----------
5 28909 100
www.killdb.com>select dbms_rowid.rowid_relative_fno(rowid) fn#,
2 dbms_rowid.rowid_block_number(rowid) blk#,
3 object_id
4 from t_buffer_busy_waits
5 where object_id = 101
6 /
FN# BLK# OBJECT_ID
---------- ---------- ----------
5 28909 101
www.killdb.com>c/101/99
5* where object_id = 99
www.killdb.com>/
FN# BLK# OBJECT_ID
---------- ---------- ----------
5 28909 99
www.killdb.com>c/99/111
5* where object_id = 111
www.killdb.com>/
FN# BLK# OBJECT_ID
---------- ---------- ----------
5 28909 111
注意，我这里就拿这几条在同一个block内的数据，来进行测试模拟 2. 模拟高并发读取 模拟高并发读取的测试过程中，我同时开了3个窗口，进行测试，另外还开了第4个窗口进行检测event，如下：
--session 1
www.killdb.com>select sid from v$Mystat where rownum < 2;
SID
----------
523
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 1000000 loop
5 select count(*) into c from t_buffer_busy_waits where object_id = 99;
6 end loop;
7 end;
8 /
PL/SQL procedure successfully completed.
--session 2
www.killdb.com>select sid from v$Mystat where rownum < 2;
SID
----------
534
www.killdb.com>www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 1000000 loop
5 select count(*) into c from t_buffer_busy_waits where object_id = 100;
6 end loop;
7 end;
8 /
PL/SQL procedure successfully completed.
--session 3
www.killdb.com>select sid from v$mystat where rownum < 2;
SID
----------
520
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 1000000 loop
5 select count(*) into c from t_buffer_busy_waits where object_id = 111;
6 end loop;
7 end;
8 /
PL/SQL procedure successfully completed.
www.killdb.com>
通过第4个会话窗口的检测，我发现，并没有buffer busy waits等待出现，但是出现了大家非常熟悉的latch：cache buffer chains.
监控会话（session 4）：
ww.killdb.com>select event,count(1) from v$session where wait_class#<>6 group by event;
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
latch: cache buffers chains 1
www.killdb.com>/
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
latch: cache buffers chains 1
从第一个测试来看，并发读取实际上并不会产生buffer busy waits。
3. 模拟2个并发会话，分别为读与写
--session 1
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 1000000 loop
5 select count(*) into c from t_buffer_busy_waits where object_id = 99;
6 end loop;
7 end;
8 /
PL/SQL procedure successfully completed.
www.killdb.com>
---session 2
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 1000000 loop
5 update t_buffer_busy_waits set object_id=111 where object_id=111;
6 end loop;
7 end;
8 /
declare
*
ERROR at line 1:
ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDOTBS2'
ORA-06512: at line 5
大家注意，这里测试的时候必须使用位于同一个数据块内的行，前面我们已经知道object_id=99和111的这2条数据是在
同一个数据块内（实际上，object_id 从99到111都是在同一块内，不用说明了吧？）
ok，下面我们来看下第3个监控会话的信息是什么样的？
---session 3
www.killdb.com>/
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
control file sequential read 1
log file switch completion 1
。。。。。
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
latch: cache buffers chains 1
log file switch completion 1
www.killdb.com>/
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
latch: cache buffers chains 2
。。。。。。
www.killdb.com>/
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
比较奇怪，居然没有出现应该出现的buffer busy waits等待事件。难道读和写不会出现这个等待吗 ？
我们先保留这个疑问，继续测试写和写的并发是否会产生buffer busy waits。
4. 模拟2个会话并发同时写
---Session 1
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 500000 loop
5 update t_buffer_busy_waits set object_id=99 where object_id=99;
6 end loop;
7 end;
8 /
PL/SQL procedure successfully completed.
--Session 2
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 500000 loop
5 update t_buffer_busy_waits set object_id=111 where object_id=111;
6 end loop;
7 end;
8 /
PL/SQL procedure successfully completed.
ok，下面我们来看下第3个监控会话的结果：
www.killdb.com>l
1* select event,count(1) from v$session where wait_class#<>6 group by event
www.killdb.com>/
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
buffer busy waits 1
latch: cache buffers chains 1
www.killdb.com>/
EVENT COUNT(1)
---------------------------------------------------------------- ----------
SQL*Net message to client 1
buffer busy waits 1
latch: cache buffers chains 1
www.killdb.com>select sid,username,p1,p2,p3,event from v$session where event like 'buffer%';
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------
523 ROGER 5 28909 1 buffer busy waits
ok，终于出现了我们希望的结果了，这个buffer busy waits来的不容易。这里我们需要说明一点，从oracle 10.1版本开始，
这里的p3 不再是像之前的数据库版本中那样，用来表示buffer busy waits的reason了，这里表示的是所等待的block的数据块
类型。很明显，这里的p3为1，那么也就是说block type 为1，表示data block，这一点不用多说了吧！
大家看Oracle AWR，我想也经常看到buffer waits，其实也会出现在其他的block 类型上，不仅仅是data block。
只不过数据块的争用更为常见一些。如果你查询文档你会发现，有下面的一些block type类型。
1 data block 7 extent map 13 file header block
2 sort block 8 1st level bmb 14 unused
3 save undo block 9 2nd level bmb 15+2*x undo header block(x=usn#)
4 segment header 10 3rd level bmb 16+2*x undo block(x=usb#)
5 save undo header 11 bitmap block
6 free list 12 bitmap index block
既然有可能是其他类型的block也会出现，那么按理说读和写是不兼容的，也应该出现，难道我们的测试有问题？
可能是并发不够，这里我再次测试了第2个测试：
Session 1：
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 500000 loop
5 update t_buffer_busy_waits set object_id=105 where object_id=105;
6 end loop;
7 end;
8 /
session 2：
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 500000 loop
5 update t_buffer_busy_waits set object_id=106 where object_id=106;
6 end loop;
7 end;
8 /
session 3:
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 500000 loop
5 update t_buffer_busy_waits set object_id=107 where object_id=107;
6 end loop;
7 end;
8 /
Session 4:
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 500000 loop
5 update t_buffer_busy_waits set object_id=108 where object_id=108;
6 end loop;
7 end;
8 /
Session 5:
www.killdb.com>declare
2 c number;
3 begin
4 for i in 1 .. 1000000 loop
5 select count(*) into c from t_buffer_busy_waits where object_id =109;
6 end loop;
7 end;
8 /
我这里同时模拟了5个会话进行操作，其中4个是update，一个进行select查询，注意，这里重复操作的5条数据，其实都是在同一个数据块中。
下面我们来看下第6个监控会话的结果是什么呢？
session 6:
www.killdb.com>select sid,username,p1,p2,p3,event from v$session where event like 'buffer%';
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
521 ROGER 2 5657 23 buffer busy waits
www.killdb.com>/
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
521 ROGER 2 5657 23 buffer busy waits
www.killdb.com>/
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
521 ROGER 2 5657 23 buffer busy waits
www.killdb.com>/
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
521 ROGER 2 5657 23 buffer busy waits
w.killdb.com>select sid,username,p1,p2,p3,event from v$session where event like 'buffer%';
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
534 ROGER 5 28909 1 buffer busy waits
www.killdb.com>/
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
521 ROGER 5 28909 1 buffer busy waits
523 ROGER 5 29037 1 buffer busy waits
524 ROGER 5 29037 1 buffer busy waits
537 ROGER 5 29037 1 buffer busy waits
www.killdb.com>/
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
521 ROGER 5 28909 1 buffer busy waits
523 ROGER 5 29037 1 buffer busy waits
524 ROGER 5 29037 1 buffer busy waits
537 ROGER 5 29037 1 buffer busy waits
www.killdb.com>/
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
520 ROGER 5 29037 1 buffer busy waits
521 ROGER 5 28909 1 buffer busy waits
534 ROGER 5 29037 1 buffer busy waits
www.killdb.com>/
SID USERNAME P1 P2 P3 EVENT
---------- ---------- ---------- ---------- ---------- ----------------------------------------
520 ROGER 5 29037 1 buffer busy waits
521 ROGER 5 28909 1 buffer busy waits
534 ROGER 5 29037 1 buffer busy waits
我们可以看到，不仅仅是数据块，这里undo 也出现的buffer busy waits，很明显，这里的file 2是undo datafile。
因此，下面我们来个简单的总结：
1) Buffer busy waits等待的本质是因为写的缘故出现争用.
2) Oracle里面写写是不兼容的，写和读也是不兼容的，有可能出现buffer busy waits等待.
3) 实际上读写并发容易产生回滚段的争用，等待事件也是buffer busy waits.
