1. 清除: make clean
2. 全编译: make -j32
make -j32 2>&1 | tee build.log
3. 编译kernel打包，以下方法编译速度从快到慢:
第一步，编译kernel:
方法一: mmm kernel-3.10/:kernel
方法二: mmm kernel-3.10/
方法三: make kernel
第二步，打包到boot.img:
方法一: make bootimage-nodeps
方法二: make bootimage
4. 编译lk: mmm -B ./bootable/bootloader/lk/:lk -j8
5. 编译custom: make customimage
6. 编译system: make systemimage
7. 打包: make snod
8. 更新modem
rm -rf out/target/product/te12/obj/ETC/BPLGUInfoCustom*
rm -rf out/target/product/te12/obj/ETC/DbgInfo_LR9.W1444.MD.LWTG*
rm -rf out/target/product/te12/obj/ETC/catcher_filter_1*
rm -rf out/target/product/te12/obj/ETC/modem_1*
rm -rf out/target/product/te12/system/etc/firmware/*
make -j32
