Panabit8#./setup回车 (大约1分钟左右,时间视硬盘大小格式化时间,安装过程首先是自动查找盘,显示查到的磁盘设备名,主要运行自动分区、格式化文件系统、安装精简FreeBSD 8.0、安装Panabit。)
Welcome to Panabit system automatically install shell!
The installation will delete all data on your hard disk and can not be restored!!
Please confirm whether or not to continue the installation!
Do you want to continue(y/n[n])? 输入y回车,否则退出。
Following disks are detected: da0 ad1 显示系统中检测到的盘。
Please select one [da0]: 回车安装缺省安装在第一个盘。
We begin to format the disk "da0" and begin to install FreeBSD 8.0!
Do you want to continue(y/n[y])? 回车继续。
cylinders=17753
heads=15
sectors/track=63
以上三行显示磁盘的CHS参数。
Formatting the disk and copy files, please wait a moment!大约等1-2分钟。
FreeBSD 8.0 Install OK!
这期间主要格式化文件系统,复制光盘上FreeBSD精简系统文件和配置。
Welcome installing panabit!
****** Congratulations ******!
You have successfully installed Panabit on your system!
em0 em1 em2
显示系统所有网卡,须选择一个做管理口的网卡,剩余的默认都作为数据接口。(注:可以在Live CD启动之后,使用FreeBSD命令ifconfig查看网卡,如果插上网线,显示网卡状态为Active,通过此方法确认物理接口对应关系。)
Please choose one of above as your admin interface: em2(仅示例,根据实际情况选择网卡名称)
Please input ip address of admin interface: 192.168.0.8
Please input network mask of admin interface: 255.255.255.0
Please input default gateway: 192.168.0.1
输入管理口网卡名称、IP地址、掩码、网关,则安装完毕!如果输入错误,等脚本运行完毕,重新做一遍!
再次显示:
Your interface configurations are:
Admin interface : em2
Admin ip address : 192.168.0.8
Admin netmask : 255.255.255.0
Default gateway : 192.168.0.1
Data interfaces : em0 em1
Eject CDROM!
Reboot system then the system automaticly start panabit at system startup!
If you want to stop the currently running panabit, you can issue
"/usr/panabit/bin/ipectrl stop" to stop it!
You can issue "/usr/panabit/bin/ipectrl start" to start panabit!
Panabit#
取出光盘,重启机器,即可https登录管理界面https://192.168.0.8,Web管理用户名admin,口令panabit。
进入Web管理界面,第一件事选择“网络配置”-->“数据接口”配置网桥,如选择网桥1,将一个网卡定义为接内网,将另一个网卡定义为接外网,分别点击提交即可,如下图: