1 Catalyst 2550/3550支持2组monitor session
Switch(config)#monitor session 1 destination interface f0/4(1为session id,id范围为1-2//定义端口源镜像,也就是要管理员希望查看的端口流量
Switch(config)#monitor session 1 source interface f0/1,f0/2,f0/3(空格,逗号,空格)//定义端口目的镜像也就是接受流量的接口
查看镜像会话 Switch#show port-monitor
Switch#show monitor session 1
2 Juniper M/T路由器端口镜像方法 forwarding-options {
port-mirroring {
input {
rate 1;
run-length 20;
}
family inet {
output {
interface fe-0/1/1.0 {
next-hop 123.1.1.2;
}
各厂商设备端口镜像配置方法
原创
©著作权归作者所有:来自51CTO博客作者北岛七海的原创作品,请联系作者获取转载授权,否则将追究法律责任
提问和评论都可以,用心的回复会被更多人看到
评论
发布评论
相关文章
-
各厂商SNMP 2.0配置
各厂商的snmp2.0的基础配置
华为 snmp 网络 -
Openvswitch 配置端口镜像
Openvswitch,端口镜像
职场 休闲 端口镜像 Openvswitch