初始化参数DB_BLOCK_CHECKING控制Oracle如何全面检查读写的每个数据块的完整性。启用的检查界别是环境中的故障承受级别(通常很低)与连续检查块所需的开销折中的结果。在11g中db_block_checking参数有了更多的选项,以满足不等的块检验粒度:
SQL> alter system set db_block_checking=AA;
alter system set db_block_checking=AA
*
ERROR at line 1:
ORA-00096: invalid value AA for parameter db_block_checking, must be from among FULL, TRUE, MEDIUM, LOW, OFF, FALSE
/* 可选的有 OFF=FALSE,FULL=TRUE以及MEDIUM和LOW */
不同的DB_BLOCK_CHECKING选项对应不同的检查粒度:
- OFF或FALSE 不执行任何检查块的操作
- LOW 在内存中更改块或从磁盘中读取块后对块进行基本检查,其中包括RAC环境中在实例间传输块的情形
- MEDIUM 包括所有LOW检查,另加检查所有非IOT(索引组织表)块
- FULL或TRUE 包括所有LOW和MEDIUM检查,另加检查索引块
在客户愿意承担性能开销的前提下,Oracle建议使用FULL值。默认值是OFF,但仍始终启用针对SYSTEM表空间的FULL块检查功能(受到隐式参数_db_always_check_system_ts的控制,默认为TRUE)。通常认为块检查开销的范围在1%~10%之间,在OLTP环境中更接近于10%。
以下为Oracle GCS对块检查性能损耗的描述:
Oracle checks a block by going through the data in the block, making sure it is logically self-consistent. Block checking can often prevent memory and data corruption. Block checking typically causes 1% to 10% overhead, depending on workload and the parameter value. The more updates or inserts in a workload, the more expensive it is to turn on block checking. You should set DB_BLOCK_CHECKING to FULL if the performance overhead is acceptable
- full - see above depending on updates and inserts and how well the database is tuned it can be costly 10%+
- medium - midrange but can be up to 10%.
- low - very low around 1 %
- off - no overhead
10%?!这是真的吗?我们不妨自己来测试一下!:
SQL> select * from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL> create table MACLEAN(t1 int,t2 char(20),t3 char(20),t4 char(20), t5 char(20),t6 date) tablespace users;
Table created.
SQL> create or replace procedure insert_data(s int) as
2 begin
3 for i in 1..s loop
4 insert into MACLEAN values(i,'A','B','C','D',sysdate);
5 commit;
6 end loop;
7 end;
8 /
Procedure created.
SQL> show parameter db_block_checking
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
db_block_checking string FALSE
SQL> begin
2 /* NON_CHECKING_50000 */
3 insert_data(50000);
4 end;
5 /
truncate table MACLEAN;
alter system flush buffer_cache;
begin
/* NON_CHECKING_100000 */
insert_data(100000);
end;
/
truncate table MACLEAN;
alter system flush buffer_cache;
begin
/* NON_CHECKING_150000 */
insert_data(150000);
end;
/
truncate table MACLEAN;
alter system flush buffer_cache;
alter system set db_block_checking=TRUE;
begin
/* DO_CHECKING_50000 */
insert_data(50000);
end;
/
truncate table MACLEAN;
alter system flush buffer_cache;
begin
/* DO_CHECKING_100000 */
insert_data(100000);
end;
/
truncate table MACLEAN;
alter system flush buffer_cache;
begin
/* DO_CHECKING_150000 */
insert_data(150000);
end;
/
PL/SQL procedure successfully completed.
SQL> SQL> SQL>
Table truncated.
SQL>
System altered.
SQL> SQL> 2 3 4 5
PL/SQL procedure successfully completed.
SQL> SQL>
Table truncated.
SQL>
System altered.
SQL> SQL> 2 3 4 5
PL/SQL procedure successfully completed.
SQL> SQL>
Table truncated.
SQL>
System altered.
SQL> SQL>
System altered.
SQL> SQL> 2 3 4 5
PL/SQL procedure successfully completed.
SQL> SQL> SQL>
Table truncated.
SQL>
System altered.
SQL> SQL> 2 3 4 5
PL/SQL procedure successfully completed.
SQL> SQL>
Table truncated.
SQL>
System altered.
SQL> SQL> 2 3 4 5
PL/SQL procedure successfully completed.
SQL> SQL> SQL> SQL> SQL> SQL>
SQL> col sql_text for a70;
SQL> select sql_text, cpu_time, elapsed_time
2 from v$sql
3 where sql_text like '%CHECKING%'
4 and sql_text not like '%v$sql%'
5 order by CPU_TIME;
SQL_TEXT CPU_TIME ELAPSED_TIME
---------------------------------------------------------------------- ---------- ------------
begin /* NON_CHECKING_50000 */ insert_data(50000); end; 7222902 7675162
begin /* DO_CHECKING_50000 */ insert_data(50000); end; 8285740 8522438
begin /* NON_CHECKING_100000 */ insert_data(100000); end; 13142002 13327092
begin /* DO_CHECKING_100000 */ insert_data(100000); end; 15353665 15686535
begin /* NON_CHECKING_150000 */ insert_data(150000); end; 19346058 19502160
begin /* DO_CHECKING_150000 */ insert_data(150000); end; 25374143 26539033
6 rows selected.
![checking 11g中的db_block_checking参数_db_block_checking](http://www.oracledatabase12g.com/wp-content/uploads/2010/09/checking.jpg)
可以看到在面对频繁的dml操作时(模拟OLTP环境),DB_BLOCK_CHECKING为TRUE对CPU资源的使用影响可能远大于10%;实际上只有极少数对数据完整性要求异常苛刻的环境中,我们才会使用到它。