1.准备工作
关掉防火墙和SELINUX
2.安装rpmforge
# yum install wget
(****CentOS 6请使用这个库****)
wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
rpm -Uvh rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm
(****CentOS 5请使用这个库****)
wget http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
rpm -Uvh rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm
3.安装需要的软件包
# yum install mod_fcgid httpd httpd-devel rrdtool fping wget curl bind-utils gcc make
# yum install perl perl-Net-Telnet perl-Net-DNS perl-LDAP perl-libwww-perl perl-RadiusPerl perl-IO-Socket-SSL perl-Socket6 perl-CGI-SpeedyCGI perl-FCGI perl-RRD-Simple perl-CGI-SpeedCGI perl-ExtUtils-MakeMaker
4.安装smokeping
# wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.8.tar.gz
# tar -zxvf smokeping-2.6.8.tar.gz -C /opt/
# mkdir /opt/smokeping
# cd /opt/smokeping-2.6.8/setup
# ./build-perl-modules.sh
# cp -r ../thirdparty /opt/smokeping/
# cd ..
# ./configure –prefix=/opt/smokeping
# make install
5.创建丢失的文件夹
# cd /opt/smokeping
# mkdir data var cache
6.添加smokeping启动/停止脚本
# wget http://new.wedebugyou.com/static/smokeping_start_stop.txt
# mv smokeping_start_stop.txt /etc/init.d/smokeping
# chmod 755 /etc/init.d/smokeping
7.重命名配置文件和更改安全
# cd /opt/smokeping/etc/
# for foo in *.dist; do cp $foo `basename $foo .dist`; done
# chmod 600 /opt/smokeping/etc/smokeping_secrets.dist
8.更改默认配置文件
# vim config
(“*”号范围离得为配置文件样例)
************************************************************************
*** General ***
owner = Nolan Guo
contact = guoyingce@originpoker.com
# mailhost = my.mail.host
# sendmail = /usr/sbin/sendmail
# NOTE: do not put the Image Cache below cgi-bin
# since all files under cgi-bin will be executed ... this is not
# good for p_w_picpaths.
imgcache = /opt/smokeping/cache
imgurl = cache
datadir = /opt/smokeping/data
piddir = /opt/smokeping/var
cgiurl = http://*****/smokeping.cgi
smokemail = /opt/smokeping/etc/smokemail.dist
tmail = /opt/smokeping/etc/tmail.dist
# specify this to get syslog logging
syslogfacility = local0
# each probe is now run in its own process
# disable this to revert to the old behaviour
# concurrentprobes = no
*** Alerts ***
to = alertee@address.somewhere
from = smokealert@company.xy
+someloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = loss 3 times in a row
*** Database ***
step = 300
pings = 20
# consfn mrhb steps total
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
*** Presentation ***
template = /opt/smokeping/etc/basepage.html.dist
+ charts
menu = Charts
title = The most interesting destinations
++ stddev
sorter = StdDev(entries=>4)
title = Top Standard Deviation
menu = Std Deviation
format = Standard Deviation %f
++ max
sorter = Max(entries=>5)
title = Top Max Roundtrip Time
menu = by Max
format = Max Roundtrip Time %f seconds
++ loss
sorter = Loss(entries=>5)
title = Top Packet Loss
menu = Loss
format = Packets Lost %f
++ median
sorter = Median(entries=>5)
title = Top Median Roundtrip Time
menu = by Median
format = Median RTT %f seconds
+ overview
width = 600
height = 50
range = 10h
+ detail
width = 600
height = 200
unison_tolerance = 2
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d
#+ hierarchies
#++ owner
#title = Host Owner
#++ owner
#title = Host Owner
#++ location
#title = Location
*** Probes ***
+ FPing
binary = /usr/sbin/fping
+ Curl
binary = /usr/bin/curl
urlformat = https://%host%/
pings = 3
*** Targets ***
probe = FPing
menu = Top
title = Network Latency Grapher
remark = Welcome to the SmokePing website of Originpoker Company. \
Here you will learn all about the latency of our network.
************************************************************************
9.smokeping到Web服务器的配置
# cd /opt/smokeping
# ln -s /opt/smokeping/cache /opt/smokeping/htdocs/cache
# chown -R apache cache
# chown -R apache data
(添加这些行为的文件/ etc /服务器/ conf.d/smokeping.conf)
ScriptAlias/smokeping/smokeping.cgi /opt/smokeping/htdocs/smokeping.fcgi.dist
Alias /smokeping /opt/smokeping/htdocs
<Directory “/opt/smokeping/htdocs”>
Options FollowSymLinks
</Directory>
10.启动服务
# /etc/init.d/smokeping start
# /etc/init.d/httpd start