Installing with Citrix XenServer
Note: To install the Adaptec RAID controller driver with CitrixXenServer, you must burn the XenServer driver iso p_w_picpath to a writeable CD. Youwill be prompted to insert the XenServer driver CD twice.You need the XenServer installation CD to complete this task. Youmust have administrator privileges to install the driver p_w_picpath.To install theAdaptec RAID controller driver while installing Citrix XenServer:
1. On the machine where you want to install the OS and RAIDcontroller driver, insert the XenServer installation CD, then restart yourcomputer.
2. When prompted to add a driver, press F9.
3. Remove the XenServerinstallation CD and insert the driver CD.
4. When the driver update is complete, remove the driver CD andinsert the XenServer installation CD.
5. Continue the XenServer installation, following the on-screeninstructions.
6. When prompted to add a driver (at the end of the OSinstallation),remove the XenServer installation CD and insert the driver CD.
7. Complete the XenServer installation, following the on-screeninstructions.
8. Remove the driver CD, thenreboot your computer.
本人安装之前，没有看adaptec官方手册，导致安装成功1-2次之后，再也没有成功过。每次都报如下图片错误，究其原因是驱动还有OS不在同一个介质或盘位导致的。用两张cd之后就再也没有发生报错。一张cd是OS，一张是driver。
报错信息
Repository dependency error:
Adatpec:aacraid requires xcp:main = 1.8.0
注意：有的人问我安装完之后，为什么系统进入图形界面就死了，其实这个还是是raid驱动的原因，在安装过程中要加载两次raid驱动。
