另外,你也可以自己定义流量数值显示的单位 #/usr/local/nload/bin/nload –help
就可以看到具体的相关参数了。
- wget http://www.roland-riegel.de/nload/nload-0.7.2.tar.gz
- tar zxvf nload-0.7.2.tar.gz
- cd nload-0.7.2
- ./configure
- make
- make install
- Device eth0 [74.125.71.17] (1/4):
- =============================================================
- Incoming:
- Curr: 1.44 MBit/s
- Avg: 1.20 MBit/s
- Min: 0.67 kBit/s
- .... . .. . . Max: 2.20 MBit/s
- ||##################||###############|||######## Ttl: 1.26 GByte
- Outgoing:
- . ################## ########|.######## #######
- # ################## ##################|#######
- # ################## ##########################
- #|################## |##########################
- #################### ###########################
- #################### ###########################
- #################### ########################### Curr: 12.92 MBit/s
- ################################################ Avg: 11.80 MBit/s
- ################################################ Min: 3.25 MBit/s
- ################################################ Max: 15.20 MBit/s
- ################################################ Ttl: 2.81 GByte
make: *** No targets specified and no makefile found. Stop.
make: *** No rule to make target `install'. Stop.