1.配置设备基本信息
包括接口ip、vlan、trunk、路由等配置
·
2.配置HSRP
//SW1配置
sw1(config)#int vlan 10
sw1(config-if)#ip add 192.168.10.1 255.255.255.0
sw1(config-if)#standby 10 ip 192.168.10.254 ------------------//配置虚拟ip地址
sw1(config-if)#standby 10 priority 200------------------------//配置优先级
sw1(config-if)#standby 10 preempt------------------------//配置抢占权
sw1(config-if)#standby 10 track f1/1 100----------//配置端口跟踪和减去的优先级
·
//SW2配置
sw2(config)#int vlan 10
sw2(config-if)#ip add 192.168.10.2 255.255.255.0
sw2(config-if)#standby 10 ip 192.168.10.254
sw2(config-if)#standby 10 priority 150
sw2(config-if)#standby 10 preempt
·
3.验证HSRP
sw1#show standby brief
P indicates configured to preempt.
|
Interface Grp Pri P State Active Standby Virtual IP
Vl10 10 200 P Active local 192.168.10.2 192.168.10.254
·
sw2#show standby brief P indicates configured to preempt. |
Interface Grp Pri P State Active Standby Virtual IP
Vl10 10 150 P Standby 192.168.10.1 local 192.168.10.254
