搭建nagios的目的就是为了他的报警系统,nagios据我所了解可以有三种报警:
一、声音报警
二、电子邮件报警
三、手机短讯报警
下面是我的邮件报警的配置过程:
1、开启系统自带的sendmail邮件系统
service sendmail start
如果没有安装,可以yum一下
yum install -y sendmail*
service sendmail restart
测试发送邮件:
echo "test" | mail lihuipeng007@163.com
我系统在关掉iptables和selinux前提下是正常的
2、配置nagios中报警邮箱
vi /usr/local/nagios/etc/objects/contacts.cfg
define contact{
contact_name nagiosadmin ; Short name of user
use generic-contact ; Inherit default values from generic-contact template (defined
above)
alias Nagios Admin ; Full name of user
email lihuipeng007@163.com
; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
}
在email那里加上自己的邮箱,如果有多个可以用逗号隔开
3、设置报警方式:
vi /usr/local/nagios/etc/objects/templates.cfg
define contact{
name generic-contact ; The name of this contact template
service_notification_period 24x7 ; service notifications can be sent anytime
host_notification_period 24x7 ; host notifications can be sent anytime
service_notification_options w,u,c,r,f,s ; send notifications for all service states, flapping events, and
scheduled downtime events
host_notification_options d,u,r,f,s ; send
notifications for all host states, flapping events, and scheduled
downtime events
service_notification_commands notify-service-by-email ; send service notifications via email
host_notification_commands notify-host-by-email ; send host notifications via email
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A
TEMPLATE!
}
这两个notify-service-by-email 和 notify-host-by-email 是在command.cfg那里定义的,看看是怎么定义的:
# 'notify-host-by-email' command definition
define command{
command_name notify-host-by-email
command_line /usr/bin/printf "%b" "***** Nagios ***** Notification
Type: $NOTIFICATIONTYPE$ Host: $HOSTNAME$ State: $HOSTSTATE$
Address: $HOSTADDRESS$ Info: $HOSTOUTPUT$ Date/Time: $LONGDATETIME$ " |
/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is
$HOSTSTATE$ **" $CONTACTEMAIL$
}
# 'notify-service-by-email' command definition
define command{
command_name notify-service-by-email
command_line /usr/bin/printf "%b" "***** Nagios ***** Notification
Type: $NOTIFICATIONTYPE$ Service: $SERVICEDESC$ Host:
$HOSTALIAS$ Address: $HOSTADDRESS$ State: $SERVICESTATE$ Date/Time:
$LONGDATETIME$ Additional Info: $SERVICEOUTPUT$ " | /bin/mail -s "**
$NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is
$SERVICESTATE$ **" $CONTACTEMAIL$
}
这里已经默认配置好,我们不用修改直接调用就是了
最后重启服务:
service nagios retart
然后随便关掉一些服务测试一下效果!
nagios邮件报警配置
原创
©著作权归作者所有:来自51CTO博客作者冰山剑客的原创作品,请联系作者获取转载授权,否则将追究法律责任
上一篇:Linux监控 Nagios
下一篇:虚拟机和真机桥接上网
![](https://ucenter.51cto.com/images/noavatar_middle.gif)
提问和评论都可以,用心的回复会被更多人看到
评论
发布评论
相关文章
-
zabbix 6.4配置企业微信群机器人报警
发布半年后,不保证文档的可用性
zabbix 企业微信 机器人 -
Nagios邮件报警、短信报警配置
2010年由于飞信升级了,以前使用的nagios、fethion for linux 作为短信报警方案现在已经失效了。而且fethion也不是非常好用,现在采用139邮箱作为短信报警方案还是切实可行的,缺点是有些延迟。 技术方案:Nagios+139邮箱+手机短信 Nagios发警告邮件默认是采用本机的smtp服务, 可以查看commands.cfg中关于发邮件
nagios监控 nagios邮件报警 nagios短信报警 nagios飞信报警 nagios139邮箱报警