SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain 

 [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1076)




The ​​ssl​​ module now uses OpenSSL’s builtin API instead of ​​match_hostname()​​ to check a host name or an IP address. Values are validated during TLS handshake. Any certificate validation error including failing the host name check now raises ​​SSLCertVerificationError​​ and aborts the handshake with a proper TLS Alert message. The new exception contains additional information. Host name validation can be customized with ​​SSLContext.hostname_checks_common_name​​. (Contributed by Christian Heimes in ​​bpo-31399​​.)


The improved host name check requires a libssl implementation compatible with OpenSSL 1.0.2 or 1.1. Consequently, OpenSSL 0.9.8 and 1.0.1 are no longer supported (see ​​Platform Support Removals​​ for more details). The ssl module is mostly compatible with LibreSSL 2.7.2 and newer.

The ​​ssl​​ module no longer sends IP addresses in SNI TLS extension. (Contributed by Christian Heimes in ​​bpo-32185​​.)

​match_hostname()​​ no longer supports partial wildcards like ​​www*​​. (Contributed by Mandeep Singh in ​​bpo-23033​​ and Christian Heimes in ​​bpo-31399​​.)

The default cipher suite selection of the ​​ssl​​ module now uses a blacklist approach rather than a hard-coded whitelist. Python no longer re-enables ciphers that have been blocked by OpenSSL security updates. Default cipher suite selection can be configured at compile time. (Contributed by Christian Heimes in ​​bpo-31429​​.)

Validation of server certificates containing internationalized domain names (IDNs) is now supported. As part of this change, the ​​SSLSocket.server_hostname​​ attribute now stores the expected hostname in A-label form (​​""​​), rather than the U-label form (​​"pythö"​​). (Contributed by Nathaniel J. Smith and Christian Heimes in ​​bpo-28414​​.)

The ​​ssl​​ module has preliminary and experimental support for TLS 1.3 and OpenSSL 1.1.1. At the time of Python 3.7.0 release, OpenSSL 1.1.1 is still under development and TLS 1.3 hasn’t been finalized yet. The TLS 1.3 handshake and protocol behaves slightly differently than TLS 1.2 and earlier, see ​​TLS 1.3​​. (Contributed by Christian Heimes in ​​bpo-32947​​, ​​bpo-20995​​, ​​bpo-29136​​, ​​bpo-30622​​ and ​​bpo-33618​​)

​SSLSocket​​ and ​​SSLObject​​ no longer have a public constructor. Direct instantiation was never a documented and supported feature. Instances must be created with ​​SSLContext​​ methods ​​wrap_socket()​​ and ​​wrap_bio()​​. (Contributed by Christian Heimes in ​​bpo-32951​​)

OpenSSL 1.1 APIs for setting the minimum and maximum TLS protocol version are available as ​​SSLContext.minimum_version​​ and ​​SSLContext.maximum_version​​. Supported protocols are indicated by several new flags, such as ​​HAS_TLSv1_1​​. (Contributed by Christian Heimes in ​​bpo-32609​​.)

Added ​​SSLContext.post_handshake_auth​​ to enable and ​​ssl.SSLSocket.verify_client_post_handshake()​​ to initiate TLS 1.3 post-handshake authentication. (Contributed by Christian Heimes in ​​bpo-34670​​.)



PEP 476 -- Enabling certificate verification by default for stdlib http clients |

Python [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed

PEP 476 -- Enabling certificate verification by default for stdlib http clients




Enabling certificate verification by default for stdlib http clients


Alex Gaynor <alex.gaynor at>




Standards Track







Currently when a standard library http client (the urllib, urllib2, http, and httplib modules) encounters an https:// URL it will wrap the network HTTP traffic in a TLS stream, as is necessary to communicate with such a server. However, during the TLS handshake it will not actually check that the server has an X509 certificate is signed by a CA in any trust root, nor will it verify that the Common Name (or Subject Alternate Name) on the presented certificate matches the requested host.

The failure to do these checks means that anyone with a privileged network position is able to trivially execute a man in the middle attack against a Python application using either of these HTTP clients, and change traffic at will.

This PEP proposes to enable verification of X509 certificate signatures, as well as hostname verification for Python's HTTP clients by default, subject to opt-out on a per-call basis. This change would be applied to Python 2.7, Python 3.4, and Python 3.5.


The "S" in "HTTPS" stands for secure. When Python's users type "HTTPS" they are expecting a secure connection, and Python should adhere to a reasonable standard of care in delivering this. Currently we are failing at this, and in doing so, APIs which appear simple are misleading users.

When asked, many Python users state that they were not aware that Python failed to perform these validations, and are shocked.

The popularity of requests (which enables these checks by default) demonstrates that these checks are not overly burdensome in any way, and the fact that it is widely recommended as a major security improvement over the standard library clients demonstrates that many expect a higher standard for "security by default" from their tools.

The failure of various applications to note Python's negligence in this matter is a source of regular CVE assignment ​​[1]​​ ​​[2]​​ ​​[3]​​ ​​[4]​​​​[5]​​ ​​[6]​​ ​​[7]​​ ​​[8]​​ ​​[9]​​ ​​[10]​​ ​​[11]​​.























​Technical Details​

Python would use the system provided certificate database on all platforms. Failure to locate such a database would be an error, and users would need to explicitly specify a location to fix it.

This will be achieved by adding a new ssl._create_default_https_context function, which is the same as ssl.create_default_context.

http.client can then replace its usage of ssl._create_stdlib_context with the ssl._create_default_https_context.

Additionally ssl._create_stdlib_context is renamed ssl._create_unverified_context (an alias is kept around for backwards compatibility reasons).

​Trust database​

This PEP proposes using the system-provided certificate database. Previous discussions have suggested bundling Mozilla's certificate database and using that by default. This was decided against for several reasons:

  • Using the platform trust database imposes a lower maintenance burden on the Python developers -- shipping our own trust database would require doing a release every time a certificate was revoked.
  • Linux vendors, and other downstreams, would unbundle the Mozilla certificates, resulting in a more fragmented set of behaviors.
  • Using the platform stores makes it easier to handle situations such as corporate internal CAs.

OpenSSL also has a pair of environment variables, SSL_CERT_DIR and SSL_CERT_FILE which can be used to point Python at a different certificate database.

​Backwards compatibility​

This change will have the appearance of causing some HTTPS connections to "break", because they will now raise an Exception during handshake.

This is misleading however, in fact these connections are presently failing silently, an HTTPS URL indicates an expectation of confidentiality and authentication. The fact that Python does not actually verify that the user's request has been made is a bug, further: "Errors should never pass silently."

Nevertheless, users who have a need to access servers with self-signed or incorrect certificates would be able to do so by providing a context with custom trust roots or which disables validation (documentation should strongly recommend the former where possible). Users will also be able to add necessary certificates to system trust stores in order to trust them globally.

Twisted's 14.0 release made this same change, and it has been met with almost no opposition.

​Opting out​

For users who wish to opt out of certificate verification on a single connection, they can achieve this by providing the contextargument to urllib.urlopen:

import ssl

# This restores the same behavior as before.
context = ssl._create_unverified_context()
urllib.urlopen("https://no-valid-cert", context=context)

It is also possible, though highly discouraged, to globally disable verification by monkeypatching the ssl module in versions of Python that implement this PEP:

import ssl

_create_unverified_https_context = ssl._create_unverified_context
except AttributeError:
# Legacy Python that doesn't verify HTTPS certificates by default
# Handle target environment that doesn't support HTTPS verification
ssl._create_default_https_context = _create_unverified_https_context

This guidance is aimed primarily at system administrators that wish to adopt newer versions of Python that implement this PEP in legacy environments that do not yet support certificate verification on HTTPS connections. For example, an administrator may opt out by adding the monkeypatch above to in their Standard Operating Environment for Python. Applications and libraries SHOULD NOT be making this change process wide (except perhaps in response to a system administrator controlled configuration setting).

Particularly security sensitive applications should always provide an explicit application defined SSL context rather than relying on the default behaviour of the underlying Python implementation.

​Other protocols​

This PEP only proposes requiring this level of validation for HTTP clients, not for other protocols such as SMTP.

This is because while a high percentage of HTTPS servers have correct certificates, as a result of the validation performed by browsers, for other protocols self-signed or otherwise incorrect certificates are far more common. Note that for SMTP at least, this appears to be changing and should be reviewed for a potential similar PEP in the future:

​Python Versions​

This PEP describes changes that will occur on both the 3.4.x, 3.5 and 2.7.X branches. For 2.7.X this will require backporting the context (SSLContext) argument to httplib, in addition to the features already backported in ​​PEP 466​​.



This document has been placed into the public domain.

Source: ​​​


Following modules built successfully but were removed because they could not be imported:

_hashlib _ssl

Could not build the ssl module!

Python requires an OpenSSL 1.0.2 or 1.1 compatible libssl with X509_VERIFY_PARAM_set1_host().

LibreSSL 2.6.4 and earlier do not provide the necessary APIs,