flume hdfs sink配置备忘
- type
hdfs - path
写入hdfs的路径,需要包含文件系统标识,比如:hdfs://namenode/flume/webdata/
可以使用flume提供的日期及%{host}表达式。 - filePrefix
默认值:FlumeData
写入hdfs的文件名前缀,可以使用flume提供的日期及%{host}表达式。 - fileSuffix
写入hdfs的文件名后缀,比如:.lzo .log等。 - inUsePrefix
临时文件的文件名前缀,hdfs sink会先往目标目录中写临时文件,再根据相关规则重命名成最终目标文件; - inUseSuffix
默认值:.tmp
临时文件的文件名后缀。 - rollInterval
默认值:30
hdfs sink间隔多长将临时文件滚动成最终目标文件,单位:秒;
如果设置成0,则表示不根据时间来滚动文件;
注:滚动(roll)指的是,hdfs sink将临时文件重命名成最终目标文件,并新打开一个临时文件来写入数据; - rollSize
默认值:1024
当临时文件达到该大小(单位:bytes)时,滚动成目标文件;
如果设置成0,则表示不根据临时文件大小来滚动文件; - rollCount
默认值:10
当events数据达到该数量时候,将临时文件滚动成目标文件; - 如果设置成0,则表示不根据events数据来滚动文件;
idleTimeout
默认值:0
当目前被打开的临时文件在该参数指定的时间(秒)内,没有任何数据写入,则将该临时文件关闭并重命名成目标文件; - batchSize
默认值:100
每个批次刷新到HDFS上的events数量; - codeC
文件压缩格式,包括:gzip, bzip2, lzo, lzop, snappy - fileType
默认值:SequenceFile
文件格式,包括:SequenceFile, DataStream,CompressedStream
当使用DataStream时候,文件不会被压缩,不需要设置hdfs.codeC;
当使用CompressedStream时候,必须设置一个正确的hdfs.codeC值; - maxOpenFiles
默认值:5000
最大允许打开的HDFS文件数,当打开的文件数达到该值,最早打开的文件将会被关闭; - minBlockReplicas
默认值:HDFS副本数
写入HDFS文件块的最小副本数。
该参数会影响文件的滚动配置,一般将该参数配置成1,才可以按照配置正确滚动文件。 - writeFormat
写sequence文件的格式。包含:Text, Writable(默认) - callTimeout
默认值:10000
执行HDFS操作的超时时间(单位:毫秒); - threadsPoolSize
默认值:10
hdfs sink启动的操作HDFS的线程数。 - rollTimerPoolSize
默认值:1
hdfs sink启动的根据时间滚动文件的线程数。 - round
默认值:false
是否启用时间上的”舍弃”,这里的”舍弃”,类似于”四舍五入”,后面再介绍。如果启用,则会影响除了%t的其他所有时间表达式; - roundValue
默认值:1
时间上进行“舍弃”的值; - roundUnit
默认值:seconds
时间上进行”舍弃”的单位,包含:second,minute,hour
示例:
a1.sinks.k1.hdfs.path = /flume/events/%y-%m-%d/%H%M/%S
a1.sinks.k1.hdfs.round = true
a1.sinks.k1.hdfs.roundValue = 10
a1.sinks.k1.hdfs.roundUnit = minute
当时间为2015-10-16 17:38:59时候,hdfs.path依然会被解析为:
/flume/events/20151016/17:30/00
因为设置的是舍弃10分钟内的时间,因此,该目录每10分钟新生成一个。
- timeZone
默认值:Local Time
时区。 - useLocalTimeStamp
默认值:flase
是否使用当地时间。 - closeTries
默认值:0
hdfs sink关闭文件的尝试次数;
如果设置为1,当一次关闭文件失败后,hdfs sink将不会再次尝试关闭文件,这个未关闭的文件将会一直留在那,并且是打开状态。
设置为0,当一次关闭失败后,hdfs sink会继续尝试下一次关闭,直到成功。 - retryInterval
默认值:180(秒)
hdfs sink尝试关闭文件的时间间隔,如果设置为0,表示不尝试,相当于于将hdfs.closeTries设置成1. - serializer
默认值:TEXT
序列化类型。其他还有:avro_event或者是实现了EventSerializer.Builder的类名。
# Name the components on this agent
a1.sources = r1
a1.sinks = k1
a1.channels = c1
# Describe/configure the source
a1.sources.r1.type = netcat
a1.sources.r1.bind = localhost
a1.sources.r1.port = 33333
# Describe the sink
a1.sinks.k1.type = logger
# Use a channel which buffers events in memory
a1.channels.c1.type = memory
a1.channels.c1.capacity = 1000
a1.channels.c1.transactionCapacity = 100
a1.sinks.k1.type = hdfs
a1.sinks.k1.hdfs.path = hdfs:///prod/data_platform/wxcui/flumesink/
a1.sinks.k1.hdfs.filePrefix = log_%Y%m%d_%H
a1.sinks.k1.hdfs.fileSuffix = .lzo
a1.sinks.k1.hdfs.useLocalTimeStamp = true
a1.sinks.k1.hdfs.writeFormat = Text
a1.sinks.k1.hdfs.fileType = DataStream
a1.sinks.k1.hdfs.rollCount = 10
a1.sinks.k1.hdfs.rollSize = 0
a1.sinks.k1.hdfs.rollInterval = 5
a1.sinks.k1.hdfs.batchSize = 10
a1.sinks.k1.hdfs.threadsPoolSize = 10
a1.sinks.k1.hdfs.idleTimeout = 0
a1.sinks.k1.hdfs.minBlockReplicas = 1
# Bind the source and sink to the channel
a1.sources.r1.channels = c1
a1.sinks.k1.channel = c1
在往nc监听的端口写数据时,使用下面命令curl telnet://localhost:33333