/etc/sysctl.conf 用于控制内核相关的配置参数,而且它的内容全部是对应于 /proc/sys/ 这个目录的子目录及文件 [root@localhost ~]$ ll /proc/sys total 0 dr-xr-xr-x 1 root root 0 Dec 25 11:38 abi # 应用的二进制信息 dr-xr-xr-x 1 root root 0 Dec 25
转载 2018-12-27 18:08:00
185阅读
2评论
tcp_fin_timeout #连接的超时 net.ipv4.tcp_tw_reuse #连接是否重用 net.ipv4.tcp_tw_recycle #快速回收 tcp_keepalive_time #保持的时间 tcp_max_syn_backlog#syn最大队列说明:本优化适合apache,nginx,squid多种等web应用,特殊的业务也可能需
原创 2016-04-03 21:44:43
4790阅读
当我编译完内核参数后,# /sbin/sysctl -perror: "net.bridge.bridge-nf-call-ip6tables" is an unknown keyerror: "net.bridge.bridge-nf-call-iptables" is an unknown keyerror: "net.bridge.bridge-nf-call-arptables" is a
原创 2014-07-05 21:45:23
1335阅读
优化没有固定的标准,按照实际需要来,下面是我转载的比较通用的,供参考创建一个文件用这种方式写实现自动化catexample>>/etc/sysctl.confvim/etc/sysctl.confnet.ipv4.tcp_fin_timeout=2#保持在FIN-WAIT-2状态的时间,使系统可以处理更多的连接。此参数值为整数,单位为秒。net.ipv4.tcp_tw_reuse=1#
转载 2019-08-12 10:49:40
1654阅读
sysctl.conf 优化 The sysctl.conf of a server is something that is seldom optimized for performance. You can get a tremendous boost in throughput by adjusting these settings. This configuration ha
转载 精选 2012-07-08 16:07:53
562阅读
The sysctl.conf of a server is something that is seldom optimized for performance. You can get a tremendous boost in throughput by adjusting these settings. This configuration has been written by Stev
转载 精选 2014-01-21 22:29:12
692阅读
来自《深入理解Nginx模块开发与架构解析》 P9#表示进程(例如一个worker进程)可能同时打开的最大句柄数,直接限制最大并发连接数fs.file max = 999999#1代表允许将状态为TIME-WAIT状态的socket连接重新用于新的连接。对于服务器来说有意义,因为有大量的TIME-WAIT状态的连接net.ipv4.tcp_tw_reuse = 1#当keepalive启用时,TC
转载 精选 2015-12-02 15:24:16
1543阅读
  设置Linux内核参数 /etc/sysctl.conf   配置 Linux 内核参数修改后不用重启动更新: /sbin/sysctl -p 打开/etc/sysctl.conf 复制如下内容 kernel.shmall = 2097152 kernel.shmmax = 2147483648 kernel.shmmni = 4096 kernel.s
原创 2011-12-12 17:54:59
10000+阅读
1点赞
vim /etc/sysctl.conf net.ipv4.tcp_syncookies = 1 #表示开启SYN Cookies。当出现SYN等待队列溢出时,启用cookies来处理,可防范少量SYN攻击,默认为0,便是关闭。 net.ipv4.tcp_tw_reuse=1 #表示开启重用。运行将TIME-WAIT sockets重新用于
原创 2016-08-01 19:20:46
2076阅读
sysctl is an interface that allows you to make changes to a running Linux kernel. With /etc/sysctl.conf you can configure various Linux networking and system settings such as: Limit network-transmitted configuration for IPv4 Limit network-transmitted configuration for IPv6 Turn on execshield protection Prevent against the common 'syn flood attack' Turn on source IP address verification Prevents a cracker from using a spoofing attack against the IP address of the server. Logs several typ
转载 精选 2011-02-26 02:46:01
669阅读
  How do I set advanced security options of the TCP/IP stack and virtual memory to improve security and 
转载 2012-10-22 17:22:44
1247阅读
设置Linux内核参数 /etc/sysctl.conf 配置 Linux 内核参数修改后不用重启动更新: /sbin/sysctl -p打开/etc/sysctl.conf 复制如下内容kernel.shmall = 2097152kernel.shmmax = 2147483648kernel.shmmni = 4096kernel.sem = 250 32000 100
转载 精选 2014-10-10 17:51:19
617阅读
来自《深入理解Nginx模块开发与架构解析》 P9 #表示进程(例如一个worker进程)可能同时打开的最大句柄数,直接限制最大并发
转载 2017-04-02 22:41:00
171阅读
2评论
# vi /etc/sysctl.conf # add by digoal.zhou fs.aio-max-nr = 1048576 fs.file-max = 76724600 kernel.core_pattern= /data01/corefiles/core_%e_%u_%t_%s.%p #
原创 2022-08-03 06:55:01
449阅读
net.nf_conntrack_max = 65536000net.netfilter.nf_conntrack_tcp_timeout_established = 1200net.ipv4.tcp_fin_timeout = 30net.ipv4.tcp_keepalive_time = 120
原创 2021-12-27 14:26:16
1295阅读
cat /etc/sysctl.conf sysctl -p fs.file max = 999999 #表示进程(例如一个worker进程)可能同时打开的最大句柄数,直接限制最大并发连接数   net.ipv4.tcp_tw_reuse = 1 #1代表允许将状态为TIME-WAIT状态的socket连接重新用于新
原创 2018-03-14 09:45:44
4898阅读
1点赞
1.在Linux 系统中,我们通常把一些配置写到/etc/sysctl.conf文件,但在Linux 7中,这个规则稍微发生了变化
原创 2022-08-05 11:40:29
707阅读
网上关于sysctl.conf的优化方案有各种版本,大多都是抄来抄去的,让新人看了很迷茫。为解决此问题,经过两天的整理,查了N多资料,将大家常用 的总结如下,很多默认的不需要修改的暂未涉及,今后将逐步把所有的项目都有个翻译、讲解、修改建议,如有修改,将以此文为准,其他地方的内容,本人不负责 更新。因此转载请注明链接地址:http://www.bsdlover.cn/security/2007/12
转载 精选 2010-07-15 13:18:27
324阅读
# Controls source route verification net.ipv4.conf.default.rp_filter = 1 net.ipv4.ip_nonlocal_bind = 1 net.ipv4.ip_forward = 1 # Do not accept source ...
转载 2021-09-21 11:40:00
130阅读
2评论
linux系统接口 允许改变正在运作linux系统接口Tcp/IP堆栈和虚拟内存系统的高级选项 用来控制Linux网络配置/proc/sys/net/core/ TCP/IP参数修改添加到/etc/sysctl.conf设置系统变量配置文件configuration file for setting
原创 2021-12-27 14:25:30
265阅读
  • 1
  • 2
  • 3
  • 4
  • 5