本文以发行版为 CentOS6.5 为例 ----->>

        1) 设置挂载源头:

            以挂载 Windows 驱动器文件系统,打开某个 CoLinux 启动设置文件(Centos6.conf)

               添加如下内容:

                

                cofs0="c:\"

                cofs1="d:\"

                cofs2="e:\"

        2)在 CoLinux 虚拟的 CentOS 下安装 autofs 软件包

                yum -y install autofs


        3) 用 vi 编辑 autofs 软件的两个配置文件

            

--------------------------------------------------------------------------

            auto.master ----->

#

# Sample auto.master file

# This is a 'master' automounter map and it has the following format:

# mount-point [map-type[,format]:]map [options]

# For details of the format look at auto.master(5).

#

/misc   /etc/auto.misc  --timeout=60

#

# NOTE: mounts done from a hosts map will be mounted with the

#       "nosuid" and "nodev" options unless the "suid" and "dev"

#       options are explicitly given.

#

/net    -hosts

#

# Include central master map if it can be found using

# nsswitch sources.

#

# Note that if there are entries for /net or /misc (as

# above) in the included master map any keys that are the

# same will not be seen as the first read key seen takes

# precedence.

#

+auto.master

---------------------------------------------------------------------------


---------------------------------------------------------------------------

        auto.misc ----->



# This is an automounter map and it has the following format

# key [ -mount-options-separated-by-comma ] location

# Details may be found in the autofs(5) manpage


cd              -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom


# the following entries are samples to pique your imagination

#linux          -ro,soft,intr           ftp.example.org:/pub/linux

#boot           -fstype=ext2            :/dev/hda1

#floppy         -fstype=auto            :/dev/fd0

#floppy         -fstype=ext2            :/dev/fd0

#e2floppy       -fstype=ext2            :/dev/fd0

#jaz            -fstype=ext2            :/dev/sdc1

#removable      -fstype=ext2            :/dev/hdd

win_c           -fstype=cofs            :cofs0

win_d           -fstype=cofs            :cofs1

win_e           -fstype=cofs            :cofs2



-------------------------------------------------------------------------


    4) 最后启动 autofs 服务即可

        /etc/init.d/autofs start