实训目的

  • 了解聚星云中交换机的硬开关机。

实训背景

在聚星云中,交换机、路由器、PC都可以由用户自主进行硬开关机。用户可以看到最初的启动信息。操作起来感觉和真机完全一致。

实训拓扑

锐捷CCNA系列(四) 交换机的硬开关机-聚星云学院

实验所需设备:

设备类型 设备型号 数量
二层交换机 S3760 1

实训步骤

步骤1:在SW1上点鼠标右键,选择“开机”

SW1启动时是这样的:

System bootstrap ...
Nor Flash ID: 0x00010049, SIZE: 2097152Bytes
Press Ctrl+B to enter Boot Menu ......
Load Ctrl Program ...

Load CTRL with ECC......
Executing program, launch at: 0x01000000
Ctrl Version: RGOS 10.3(5b1), Release(84107)
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
Press Ctrl+C to enter Ctrl Menu ......
Main Program File Name rgos.bin, Load Main Program ...

SW1启动完毕后是这样的:

Executing program, launch at: 0x00010000
Ruijie General Operating System Software
Release Software (tm), RGOS 10.3(5b1), Release(84107), Compiled Wed May  5 12:08:00 CST 2010 by ngcf61

Copyright (c) 1998-2010s by Ruijie Networks.
All Rights Reserved.
Decompiling or Reverse Engineering is Not Allowed.

*Oct 15 03:01:15: %MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
*Oct 15 03:01:30: %DEVICE-5-CHANGED: Device S3760-48 (1) changed state to up.
*Oct 15 03:01:46: %SYS-5-COLDSTART: System coldstart.

步骤2:在SW1上点鼠标右键,选择“关机”。

此时Console不接受响应。