在 CentOS 上安装 Docker

注意:切勿在没有配置 Docker YUM 源的情况下直接使用 yum 命令安装 Docker。

官方文档:https://docs.docker.com/engine/install/centos/

1 - 准备工作

1.1 - 系统要求

Docker CE 支持 64 位版本 CentOS 7,并且要求内核版本不低于 3.10。 CentOS 7 满足最低内核的要求,但由于内核版本比较低,部分功能(如 overlay2 存储层驱动)无法使用,并且部分功能可能不太稳定。

1.2 - 卸载旧版本

旧版本的 Docker 称为 docker 或者 docker-engine,使用以下命令卸载旧版本:

$ sudo yum remove docker \
                  docker-client \
                  docker-client-latest \
                  docker-common \
                  docker-latest \
                  docker-latest-logrotate \
                  docker-logrotate \
                  docker-selinux \
                  docker-engine-selinux \
                  docker-engine

2 - 使用 yum 安装

2.1 - 安装依赖包

$ sudo yum install -y yum-utils \
           device-mapper-persistent-data \
           lvm2

鉴于国内网络问题,强烈建议使用国内源,官方源请在注释中查看。

2.2. = 添加 yum 软件源

$ sudo yum-config-manager \
    --add-repo \
    https://mirrors.ustc.edu.cn/docker-ce/linux/centos/docker-ce.repo

$ sudo sed -i 's/download.docker.com/mirrors.ustc.edu.cn\/docker-ce/g' /etc/yum.repos.d/docker-ce.repo

# 官方源
# $ sudo yum-config-manager \
#     --add-repo \
#     https://download.docker.com/linux/centos/docker-ce.repo

2.3 - 如无需要则忽略

如果需要测试版本的 Docker CE 请使用以下命令:

$ sudo yum-config-manager --enable docker-ce-test

如果需要每日构建版本的 Docker CE 请使用以下命令:

$ sudo yum-config-manager --enable docker-ce-nightly

2.4 - 安装 Docker CE

更新 yum 软件源缓存,并安装 docker-ce。

$ sudo yum makecache fast
$ sudo yum install docker-ce

3 - 启动 Docker CE

$ sudo systemctl enable docker
$ sudo systemctl start docker

4 - 建立 docker 用户组

默认情况下,docker 命令会使用 Unix socket 与 Docker 引擎通讯。而只有 root 用户和 docker 组的用户才可以访问 Docker 引擎的 Unix socket。出于安全考虑,一般 Linux 系统上不会直接使用 root 用户。因此,更好地做法是将需要使用 docker 的用户加入 docker 用户组。

4.1 - 建立 docker 组

$ sudo groupadd docker

4.2 - 将当前用户加入 docker 组

$ sudo usermod -aG docker $USER

退出当前终端并重新登录,进行如下测试。

5 - 测试 Docker 是否安装正确

$ docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
0e03bdcc26d7: Pull complete 
Digest: sha256:49a1c8800c94df04e9658809b006fd8a686cab8028d33cfba2cc049724254202
Status: Downloaded newer image for hello-world:latest

Hello from Docker!
This message shows that your installation appears to be working correctly.

To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    (amd64)
 3. The Docker daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
    to your terminal.

To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash

Share images, automate workflows, and more with a free Docker ID:
 https://hub.docker.com/

For more examples and ideas, visit:
 https://docs.docker.com/get-started/

若输出以上信息,则说明安装成功。

6 - 镜像加速

如果在使用过程中发现拉取 Docker 镜像十分缓慢,可以配置 Docker 国内镜像加速。

6.1 - 镜像加速器

对于使用 systemd 的系统,请在 /etc/docker/daemon.json 中写入如下内容(如果文件不存在请新建该文件)

$ vim /etc/docker/daemon.json
{
  "registry-mirrors": [
    "https://hub-mirror.c.163.com",
    "https://mirror.baidubce.com"
  ]
}

注意:一定要保证该文件符合 json 规范,否则 Docker 将不能启动。

之后重新启动服务。

$ sudo systemctl daemon-reload
$ sudo systemctl restart docker

6.2 - 检查加速器是否生效

执行 $ docker info,如果从结果中看到了如下内容,说明配置成功。

$ docker info
...
...
Registry Mirrors:
 https://hub-mirror.c.163.com/
 https://mirror.baidubce.com/
...

7 - 安装过程中遇到的问题

如果在 CentOS 使用 Docker CE 看到下面的这些警告信息:

WARNING: bridge-nf-call-iptables is disabled
WARNING: bridge-nf-call-ip6tables is disabled

请添加内核配置参数以启用这些功能。

$ sudo tee -a /etc/sysctl.conf <<-EOF
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

然后重新加载 sysctl.conf 即可

$ sudo sysctl -p

参考 Docker 官方 CentOS 安装文档:https://docs.docker.com/engine/install/centos/

8 - 使用镜像

列出镜像
$ docker image ls

镜像体积
$ docker system df

虚悬镜像(既没有仓库名,也没有标签,均为 <none>)
$ docker image ls -f dangling=true
REPOSITORY          TAG                 IMAGE ID            CREATED             SIZE
<none>              <none>              00285df0df87        5 days ago          342 MB
一般来说,虚悬镜像已经失去了存在的价值,是可以随意删除的,可以用下面的命令删除。
$ docker image prune

中间层镜像
$ docker image ls -a

列出部分镜像
$ docker image ls ubuntu

以特定格式显示
列出镜像ID
$ docker image ls -q
列出只包含镜像ID和仓库名
$ docker image ls --format "{{.ID}}: {{.Repository}}"
列出含标题、并只包含镜像ID和仓库名
$ docker image ls --format "table {{.ID}}\t{{.Repository}}"

9 - Dockerfile

详情 Dockerfile 见我的 GitHub : https://github.com/Jerome-LJ/DockerFiles