Starting...

Starting at 0x6c00000...

Initializing Flash Module .................................................Done

Intilalizing Port 0 MAC:00-25-9e-6e-1c-08 .................................Done

Intilalizing Port 1 MAC:00-25-9e-6e-1c-09 .................................Done

Initializing Lsw6045 ......................................................Done

Intilalizing the Debug Port................................................Done

Attached TCP/IP interface to eth unit 0....................................Done

Attaching network interface lo0............................................Done
Load Network Protocol......................................................Done

     ****************************************************
     *                                                  *
     *          S9300 Bootload, Ver 107                 *
     *                                                  *
     ****************************************************

    Copyright(C) 2003-2009 by HUAWEI TECHNOLOGIES CO., LTD.
    Creation date: May  5 2009, 11:31:04

    PCB Version     : LE02MCUA VER.C
    CPU type        : Cavium Octeon
    CPU L2 Cache    : 128KB
    CPU Clock Speed : 500MHz
    BUS Clock Speed : 133MHz
    Memory Type     : DDR2 SDRAM
    Memory Size     : 512MB
    Memory Speed    : 667MHz

CF Card Init....Done

Press Ctrl+B to enter Boot Menu...
Auto-booting...

Booting from Flash...

Initiate Flash VFS...OK!

Getting Device Index named "flash:"...OK!

This Flash is already formatted!

 

Initializing Lsw6045 ......................................................Done

ulRet is 0

init vcmu OK

Bootrom CRC Check  test.............................  pass.

Epld  test .......................................... pass.

Nvram DataBus test ...................................pass.

Nvram AddressBus test ................................pass.

Battery  test ........................................pass.

LanSwitch  test ......................................pass.

THE PHY(0)  test .....................................pass.

THE PHY(1)  test .....................................pass.

THE PHY(2)  test .....................................pass.

Disable manage port...Done

DOPRA_C Library release version 1.6.6.3, by DOPRA.

Copyright (C) 1999-2008 Huawei Technologies Co., Ltd.

DOPRA is a registered trademark of Huawei Technologies Co., Ltd.

This is commercial software; see the source for copying conditions.

There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Initilizing module Product adaption...........................................OK

L[2955] the g_LastPower[3] change to 180

Drv_Rcv_Reg OK!

Creating Task RTMR............................................................OK

Initilizing module Board install driver.......................................OK

BSP_GetFlashSize success : 67108864

flashInfoGet success , block size: 131072

Initilizing module IPC_VP_CHANNEL.............................................OK

Initilizing module VRP_FILE_SYSTEM............................................OK

Initilizing module HARDWARE_MPU_BACKUP........................................OK

No valid task switch track for last rebooting.

Initial time is 2009.11.25 16:36:45.000

L[2955] the g_LastPower[2] change to 450Initilizing module OS_MONITOR.................................................OK

Initilizing module LAM........................................................OK

Initilizing module LCNS.......................................................OK

Creating Task VRPR............................................................OK

Creating Task VRPI............................................................OK

Initilizing module GET_DEVICE_LINK............................................OK

Initilizing module CFG_Plane..................................................OK

Initilizing module CFM........................................................OK

Creating Task CFA.............................................................OK

Creating Task INFO............................................................OK

Creating Task LCS.............................................................OK

Creating Task ALM.............................................................OK

Creating Task CDEV............................................................OK

Creating Task DFSU............................................................OK

Creating Task DSMS............................................................OK

Creating Task CAT.............................................................OK

Creating Task IFPD............................................................OK

Creating Task PPI.............................................................OK

Creating Task L3AD............................................................OK

Creating Task UDPH............................................................OK

Creating Task L2IF............................................................OK

Creating Task MFLP............................................................OK

Creating Task LLDP............................................................OK

Creating Task APS.............................................................OK

Creating Task ND..............................................................OK

Creating Task DIAG............................................................OK

Creating Task FIB6............................................................OK

Creating Task FHM.............................................................OK

Creating Task BFD.............................................................OK

Creating Task ROUT............................................................OK

Creating Task LSPM............................................................OK

Creating Task OAM.............................................................OK

Creating Task LSPA............................................................OK

Creating Task PHY.............................................................OK

Creating Task LDP.............................................................OK

Creating Task RSVP............................................................OK

Creating Task CSPF............................................................OK

Creating Task TNLM............................................................OK

Creating Task L2V.............................................................OK

Creating Task SNPG............................................................OK

Creating Task EFM.............................................................OK

Creating Task MGR.............................................................OK

Creating Task EOAM............................................................OK

Creating Task CCTL............................................................OK

Creating Task TCTL............................................................OK

Creating Task TRAF............................................................OK

Creating Task DLDP............................................................OK

Creating Task LDT.............................................................OK

Creating Task PPIU............................................................OK

Creating Task PING............................................................OK

Creating Task ELAB............................................................OK

Creating Task MPLS............................................................OK

Creating Task OAMT............................................................OK

Creating Task GREP............................................................OK

Creating Task SECE............................................................OK

Creating Task QOSA............................................................OK

Creating Task VCON............................................................OK

Creating Task IPMC............................................................OK

Creating Task OAM1............................................................OK

Creating Task ADPT............................................................OK

Creating Task SDKE............................................................OK

Creating Task CSBR............................................................OK

Creating Task FIB.............................................................OK

Creating Task SOCK............................................................OK

Creating Task VTYD............................................................OK

Creating Task IFNT............................................................OK

Creating Task IDEV............................................................OK

Creating Task RSA.............................................................OK

Creating Task TUNN............................................................OK

Creating Task AGNT............................................................OK

Creating Task TRAP............................................................OK

Creating Task NQAC............................................................OK

Creating Task NQAS............................................................OK

Creating Task MDMT............................................................OK

Creating Task TRUN............................................................OK

Creating Task LOAD............................................................OK

Creating Task NTPT............................................................OK

Creating Task AAA.............................................................OK

Creating Task RDS.............................................................OK

Creating Task TAC.............................................................OK

Creating Task WEB.............................................................OK

Creating Task UCM.............................................................OK

Creating Task LAM.............................................................OK

Creating Task CFM.............................................................OK

Creating Task HS2M............................................................OK

Creating Task MSTP............................................................OK

Creating Task SMLK............................................................OK

Creating Task RRPP............................................................OK

Creating Task SNP.............................................................OK

the AC sdr get

the DC sdr get


Recover configuration...OK!
Press ENTER to get started.

***********************************************************
*           All rights reserved (2003-2009)               *
*       Without the owner's prior written consent,        *
* no decompiling or reverse-engineering shall be allowed. *
* Notice:                                                 *
*      This is a private communication system.            *
*   Unauthorized access or use may lead to prosecution.   *
***********************************************************

User interface con0 is available

Please Press ENTER.

<9303>

<9303>?
User view commands:
  arp-ping       ARP-ping
  backup         Backup  information
  cd             Change current directory
  check          Check version
  clock          Specify the system clock
  compare        Compare function
  copy           Copy from one file to another
  debugging      Enable system debugging functions
  delete         Delete a file
  dir            List files on a file system
  display        Display command
  format         Format the device
  free           Release a user terminal interface
  ftp            Establish an FTP connection
  language-mode  Specify the language environment
  license        Active license File
  lldp           Link Layer Discovery Protocol
  lock           Lock the current user terminal interface
  mkdir          Create a new directory
  more           Display the contents of a file
  move           Move the file
  mpls           MPLS parameters
  mtrace         Trace route to multicast source
  patch          Patch subcommands
  patch-state    The patch state 
  ping           Send echo messages
  power          Power on or off operate
  pwd            Display current working directory
  quit           Exit from current command view
  reboot         Reboot system
  refresh        Do soft reset
  rename         Rename a file or directory
  reset          Reset functions
  rmdir          Remove an existing directory
  save           Save current configuration

<9303>
<9303>dir falsh
Directory of cfcard:/

  Idx  Attr     Size(Byte)  Date        Time      FileName 
    0  drw-              -  Nov 14 2009 09:50:18  logfile
    1  -rw-            105  Nov 25 2009 17:34:02  private-data.txt
    2  -rw-            624  Nov 25 2009 17:34:02  vrpcfg.zip
    3  -rw-              4  Nov 25 2009 05:40:36  snmpnotilog.txt
    4  -rw-            198  Nov 25 2009 16:36:48  $_patchstate_a
    5  -rw-          1,193  Nov 23 2009 17:13:04  123.cfg
    6  -rw-          1,763  Nov 25 2009 17:39:34  091122.cfg

500,192 KB total (497,000 KB free)

<9303>save
The current configuration will be written to the device. Continue? [Y/N]:y
Now saving the current configuration to the device.
Nov 25 2009 17:41:20 9303 %%01CFM/4/SAVE(l): The user chose Y when deciding whether to save the configuration to the device...
Info: Succeeded in saving the current configuration to the master board device.
Info: Succeeded in saving the current configuration to the device.
<9303>dir
Directory of cfcard:/

  Idx  Attr     Size(Byte)  Date        Time      FileName 
    0  drw-              -  Nov 14 2009 09:50:18  logfile
    1  -rw-            105  Nov 25 2009 17:34:02  private-data.txt
    2  -rw-            631  Nov 25 2009 17:41:20  vrpcfg.zip
    3  -rw-              4  Nov 25 2009 05:40:36  snmpnotilog.txt
    4  -rw-            198  Nov 25 2009 16:36:48  $_patchstate_a
    5  -rw-          1,193  Nov 23 2009 17:13:04  123.cfg
    6  -rw-          1,763  Nov 25 2009 17:39:34  091122.cfg

500,192 KB total (497,000 KB free)

<9303>
Nov 25 2009 16:37:15 9303 %%01ALML/4/CAN_SELFTEST_OK(l): canbus node of PWR board[7] selftest OK.

Nov 25 2009 16:37:58 9303 %%01IFNET/4/IF_ENABLE(l): Interface GigabitEthernet1/0/22 has been available.
Nov 25 2009 16:37:58 9303 %%01IFNET/4/IF_ENABLE(l): Interface GigabitEthernet1/0/23 has been available.
Nov 25 2009 16:37:58 9303 %%01IFNET/4/BOARD_ENABLE(l): Board 1 has been available.
<9303>
<9303>system-view
Enter system view, return user view with Ctrl+Z.
[9303]
[9303]disp devic
S9303's Device status:
Slot  Sub Type  Online    Power      Register       Alarm      Primary
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1     -   LPU   Present   PowerOn    Registered     Normal     NA   
4     -   MCU   Present   PowerOn    Registered     Normal     Master
PWR1  -   PWR   Present   PowerOn    Registered     Normal     NA   
FAN1  -   FAN   Present   PowerOn    Registered     Normal     NA   

[9303]
[9303]disp version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.50 (S9300 V100R001C02B125)
Copyright (C) 2003-2009 HUAWEI TECH CO., LTD
Quidway S9303 Terabit Routing Switch uptime is 0 week, 0 day, 0 hour, 5 minutes
BKP 0 version information:
1. PCB      Version  : LE02BAKM VER.A
2. If Supporting PoE : Yes
3. Board Type        : BAKM
4. MPU Slot Quantity : 2
5. LPU Slot Quantity : 3

MCU 4(Master) : uptime is 0 week, 0 day, 0 hour, 5 minutes
SDRAM Memory Size    : 512     M bytes
Flash Memory Size    : 64      M bytes
NVRAM Memory Size    : 512     K bytes
CF Card1 Memory Size : 488     M bytes
MPU version information :
1. PCB      Version  : LE02MCUA VER.C
2. MAB      Version  : 0
3. Board    Type     : MCUA
4. CPLD1    Version  : 102
5. BootROM  Version  : 106
6. BootLoad Version  : 107

LPU 1 : uptime is 0 week, 0 day, 0 hour, 4 minutes
SDRAM Memory Size    : 256     M bytes
Flash Memory Size    : 16      M bytes
LPU version information :
1. PCB      Version  : LE02G24S VER.B
2. MAB      Version  : 0
3. Board    Type     : G24SA
4. CPLD1    Version  : 101
5. BootROM  Version  : 106
6. BootLoad Version  : 107

[9303]
[9303]disp power system
The total power is :800.0(W)
The used power is :85.0(W)
The remain power is :715.0(W)
The system used power detail information :
-------------------------------------------------
SlotId    BoardName      State        Power(W) 
-------------------------------------------------
   1       LE02G24SA      On           45.0
   4       LE02MCUA       On           18.0
   6       FAN board      On           22.0
   7       PWR board      On           800.0
[9303]
[9303]
[9303]disp this
#
sysname 9303
#
return
[9303]
[9303]
[9303]disp tran   
[9303]disp transceiver

GigabitEthernet1/0/0 transceiver information:
-------------------------------------------------------------
Common information:
  Transceiver Type               :1000_BASE_SX_SFP
  Connector Type                 :LC
  Wavelength(nm)                 :850
  Transfer Distance(m)           :500(50um),300(62.5um)
  Digital Diagnostic Monitoring  :YES
  Vendor Name                    :JDSU           
  Ordering Name                  :
-------------------------------------------------------------
Manufacture information:
  Manu. Serial Number            :C944QQ1X6      
  Manufacturing Date             :2009-10-28
  Vendor Name                    :JDSU           
-------------------------------------------------------------
Alarm information:

  RX loss of signal

  RX power low
-------------------------------------------------------------

GigabitEthernet1/0/2 transceiver information:
-------------------------------------------------------------
Common information:
  Transceiver Type               :1000_BASE_SX_SFP
  Connector Type                 :LC
  Wavelength(nm)                 :850
  Transfer Distance(m)           :500(50um),300(62.5um)
  Digital Diagnostic Monitoring  :YES
  Vendor Name                    :JDSU           
  Ordering Name                  :
-------------------------------------------------------------
Manufacture information:
  Manu. Serial Number            :C944QQ2GN      
  Manufacturing Date             :2009-10-28
  Vendor Name                    :JDSU           
-------------------------------------------------------------
Alarm information:

  RX loss of signal

  RX power low
-------------------------------------------------------------

GigabitEthernet1/0/12 transceiver information:
-------------------------------------------------------------
Common information:
  Transceiver Type               :1000_BASE_SX_SFP
  Connector Type                 :LC
  Wavelength(nm)                 :850
  Transfer Distance(m)           :500(50um),300(62.5um)
  Digital Diagnostic Monitoring  :YES
  Vendor Name                    :JDSU           
  Ordering Name                  :
-------------------------------------------------------------
Manufacture information:
  Manu. Serial Number            :C944QQCAF      
  Manufacturing Date             :2009-10-30
  Vendor Name                    :JDSU           
-------------------------------------------------------------
Alarm information:

  RX loss of signal

  RX power low
-------------------------------------------------------------

GigabitEthernet1/0/14 transceiver information:
-------------------------------------------------------------
Common information:
  Transceiver Type               :1000_BASE_SX_SFP
  Connector Type                 :LC
  Wavelength(nm)                 :850
  Transfer Distance(m)           :500(50um),300(62.5um)
  Digital Diagnostic Monitoring  :YES
  Vendor Name                    :JDSU           
  Ordering Name                  :
-------------------------------------------------------------
Manufacture information:
  Manu. Serial Number            :C944QQ86D      
  Manufacturing Date             :2009-10-29
  Vendor Name                    :JDSU           
-------------------------------------------------------------
Alarm information:

  RX loss of signal

  RX power low
-------------------------------------------------------------
[9303]
[9303]disp health
Disk Usage Information:
System disk usage at 2009-11-25 16:44:36 316 ms
-------------------------------------------------------------------------------
  Slot      Device    Total Memory(MB)     Used Memory(MB)    Used Percentage 
-------------------------------------------------------------------------------
   4        flash:        49                  21                 42%
            cfcard:       500                 3                  0%
-------------------------------------------------------------------------------

System Voltage Information:
System voltage at 2009-11-25 16:44:36 957 ms
-------------------------------------------------------------------------------
Slot Card SDR No.  SensorName          Status  Upper    Lower    Voltage.(V) 
-------------------------------------------------------------------------------
  1    -    3       3.3V                normal  3.9592   2.6460   3.3320
       -    4       1.05V               normal  1.2642   0.8428   1.0584
       -    5       1.25V               normal  1.4994   0.9996   1.2740
       -    6       1.8V                normal  2.1560   1.4406   1.8228
       -    7       2.5V                normal  2.9988   1.9992   2.5284
       -    8       12V                 normal  14.3590  9.5450   11.9520
       -    9       2.5V_MII            normal  2.9988   1.9992   2.5088

  4    -    3       3.3V                normal  3.9592   2.6460   3.3124
       -    4       2.5V                normal  2.9988   1.9992   2.5088
       -    5       12V                 normal  14.3590  9.5450   12.0350
       -    6       1.8V                normal  2.1560   1.4406   1.8130
       -    7       1.1V                normal  1.3230   0.8820   1.1074
-------------------------------------------------------------------------------

System Power Information:
System power at 2009-11-25 16:44:38 508 ms
-------------------------------------------------------------------------------
   PowerNo     Present     Mode      State      Current(A)      Voltage(V)    
  ---- More ----[42D                                          [42D-------------------------------------------------------------------------------
     7           YES        AC        Supply     0.8100          53.5200
     8           NO         N/A       N/A        N/A             N/A
-------------------------------------------------------------------------------

System Temperature Information:
System temperature at 2009-11-25 16:44:44 688 ms
-------------------------------------------------------------------------------
Slot Card SDR No.  SensorName          Status   Upper  Lower  Temperature.(C)
-------------------------------------------------------------------------------
  1    -    1       G24SA_VB TEMP       normal   88.00  0.00   32.00

  4    -    1       02MCUA_VA TEMP      normal   80.00  0.00   37.00
-------------------------------------------------------------------------------

System Fan Information:
System fan information at 2009-11-25 16:44:45 337 ms
-------------------------------------------------------------------------------
            FanId   FanNum   present   register   Speed   MODE                
-------------------------------------------------------------------------------
             6      [1-2]     YES       YES        29%    AUTO
                     1                           2310
                     2                           2100
-------------------------------------------------------------------------------

System Memory Usage Information:
System memory usage at 2009-11-25 16:44:46 48 ms
-------------------------------------------------------------------------------
Slot     Total Memory(MB)   Used Memory(MB)   Used Percentage   Upper Limit  
-------------------------------------------------------------------------------
  1          185                26                14%               85%
  4          375                132               35%               90%
  ---- More ----[42D                                          [42D-------------------------------------------------------------------------------

System CPU Usage Information:
System cpu usage at 2009-11-25 16:44:47 348 ms
-------------------------------------------------------------------------------
       Slot              CPU Usage             Upper Limit                    
-------------------------------------------------------------------------------
        1                  4%                     90%
        4                  5%                     90%
-------------------------------------------------------------------------------

[9303]
<9303>disp cpu-usage
CPU Usage Stat. Cycle: 60 (Second)
CPU Usage            : 6% Max: 47%
CPU Usage Stat. Time : 2009-11-25  16:45:32
CPU Usage Stat. Tick : 0x3e(CPU Tick High) 0x60869337(CPU Tick Low)
Actual Stat. Cycle   : 0x7(CPU Tick High) 0xc13e749(CPU Tick Low)

TaskName        CPU        Runtime(CPU Tick High/CPU Tick Low)
BUFM             0%               0/   21dee
VIDL            94%               6/b1a0a03b
TICK             0%               0/ 47dc09e
VRRP             0%               0/  626d5f
IPCR             0%               0/    c090
Ecm             0%               0/  4b8138
RTMR             0%               0/ 4423351
IPCQ             0%               0/  5c1446
  VP             0%               0/    1029
RPCQ             0%               0/  14d179
BEAT             0%               0/  1abdec
VMON             0%               0/   12ce2
DHCP             0%               0/  189bec
tNet             0%               0/  6e0c8b
tDca             0%               0/  196fc8
smsT             0%               0/ 2590103
smsT             0%               0/   f85ef
smsR             0%               0/  10b80c
smsR             0%               0/   33e29
smsR             0%               0/  1bf91b
smsL             0%               0/ 198cc2f
smsv             1%               0/1352fcfe
smsv             0%               0/  12b5a3
smsp             0%               0/ 31ae626
smsv             0%               0/ 5d2f3ff
smsv             0%               0/  1ea4f1
STND             0%               0/ 2b6e3bf
CFA             0%               0/  15e4c5
CDEV             0%               0/  1ba501
DFSU             0%               0/ 1bccd04
DSMS             0%               0/   2f40a
L2IF             0%               0/  383be7
MFLP             0%               0/   51757
LLDP             0%               0/   525c2
APS             0%               0/  2e965a
FIB6             0%               0/  f8bfae
BFD             0%               0/  72d81e
ROUT             0%               0/ cf8a814
OAM             0%               0/  634b12
PHY             0%               0/   452dc
RSVP             0%               0/  634705
CSPF             0%               0/ 22d7548
TNLM             0%               0/  2dbbe2
SNPG             0%               0/  8e3538
EOAM             0%               0/   5a025
TRAF             0%               0/  67f72f
DLDP             0%               0/   50ca4
LDT             0%               0/   457c9
ELAB             0%               0/   765ed
GREP             0%               0/   44817
SECE             0%               0/  2dba42
IPMC             0%               0/  37b391
SOCK             0%               0/  1a579f
VTYD             0%               0/  52b8a3
TUNN             0%               0/  79d604
TRAP             0%               0/ 16baf26
MDMT             0%               0/ 15d9765
LOAD             0%               0/   4b605
NTPT             0%               0/ b6ddbf5
TAC             0%               0/  66c86b
UCM             0%               0/    cf4e
LAM             0%               0/    155b
MSTP             0%               0/  5a4734
SMLK             0%               0/   777c1
RRPP             0%               0/   ac0cf
RMON             0%               0/   b9d33
HOT             0%               0/ 2ceb355
co0             0%               0/ 442a634
  OS             5%               0/       0

[9303]disp environment version
SMS and canbus version information:
1. SMS software version: 018

LPU board[1] canbus version information:
1. APP  Version : 00e
2. BOOT Version : 064
3. PCB  Version : 011
4. SDR  Version : 003

MCU board[4] canbus version information:
1. APP  Version : 00f
2. BOOT Version : 064
3. PCB  Version : 002
4. SDR  Version : 003

FAN board[6] canbus version information:
1. Software Version : 067

PWR board[7] canbus version information:
1. Software Version : 0.5
2. Hardware Version : 001
3. Date             : 010609

[9303]
[9303]?
System view commands:
  _emtest               _emtest
  aaa                   AAA(Authentication,Authorization,Accounting) view
  acl                   Specify acl configuration information
  apply                 Apply fib routing policy
  arp                   Specify ARP configuration information
  arp-miss              ARP-miss message
  arp-ping              ARP-ping
  arp-suppress          Specify arp suppress configuration information, default
                        is disabled
  assign                Assign Resource
  backup                Backup  information
  bfd                   Specify BFD(Bidirectional Forwarding Detection)
                        configuration information
  bgp                   Border Gateway Protocol(BGP)
  blacklist             Set or display blacklist
  bpdu-tunnel           bpdu-tunnel
  bulk-file             Specify the file name of bulk statistics
  bulk-stat             Set bulk statistics
  ccc                   Circuit Cross Connection
  cfm                   Connectivity fault management
  clear                 Cancel current setting
  command-privilege     Specify the command level
  controller            Specify controller configuration view
  cpcar                 Enter CPCAR view
  dhcp                  Dynamic host configure protocol
  diffserv              Specify diffserv parameters
  display               display
  dldp                  Device link detection protocol 
  dns                   Specify domain name system
  drop-profile          Drop profile
  efm                   EFM module
  execute               Batch Command
  explicit-path         Configure Explicit-Path
  fec-list              fec-list
  file                  Specify file system configuration information
  header                Define the login banner
  hotkey                Specify hotkey configuration information
  hwtacacs-server       Set HWTACACS server
  icmp                  Specify ICMP configuration information
  icmp-reply            Enable ICMP reply fast
  ifindex               Constant-ifindex information
  igmp                  Specify IGMP configuration information
  igmp-proxy            Specify parameters for IGMP-Proxy
  igmp-snooping         Specify parameters for IGMP-Snooping
  info-center           Specify message output configuration information
  interface             Specify the interface configuration view
  ip                    IP global configuration commands
  ipv6                  Enable IPv6 functionality
  isis                  Intermediate System to Intermediate System (ISIS)
                        routes
  l2-topology           Layer 2 topology
  lacp                  Link aggregation control protocol
  lldp                  Link Layer Discovery Protocol
  load-balance          Specify load balance mode
  load-balance-profile  Enhanced Load-balance profile
  loop-detection        Loop detection config
  lspv                  Lsp verification
  mac-address           MAC address
  matched               Is Command can be matched by upper template
  mip                   Configure a rule used to create MIP
  mld                   Specify MLD configuration information
  monitor-link          Monitor link configuration infomation
  msdp                  Specify MSDP(Multicast Source Discovery Protocol)
                        configuration information
  mtrace                Trace route to multicast source
  multicast             Specify multicast configuration information
  natpt                 Specify NATPT(Network Address Translation-Protocol
                        Translation) configuration information
  nqa                   Specify NQA test class
  nqa-server            Specify NQA echo server
  ntp-service           Specify NTP(Network Time Protocol) configuration
                        information
  oam-mgr               oam-mgr View
  observe-port          Specify Observe port
  ospf                  Open Shortest Path First (OSPF)
  ospfv3                OSPF version 3 for IPv6
  pim                   Specify PIM(Protocol Independent Multicast)
                        configuration information
  pim-ipv6              PIM IPv6 status and configuration information
  ping                  Ping function
  policy-based-route    Specify a policy for policy based routing
  port-group            port-group view
  power                 Power on or off operate
  pw-template           Specify PW template configuration
  qos                   Quality of Service
  quit                  Exit from current command view
  radius-server         Add or delete RADIUS server template
  recover               Recover operation
  refresh               Refresh routes to I/O board
  reset                 Reset operation
  return                Exit to user view
  rip                   Specify RIP(Routing Information Protocol) configuration
                        information
  ripng                 Specify RIPng(Routing Information Protocol for
                        IPv6)configuration information
  rmon                  Specify RMON
  rmon2                 Specify RMON2 Config
  route                 Routing Module
  route-policy          route-policy
  route-policy-change   Specify route policy change parameter
  router                Configure router information
  rrpp                  Rapid ring protection protocol 
  rsa                   Specify RSA module configuration information
  service               Toggle service mode.By default it is off
  set                   set
  sftp                  Set SFTP service attribute
  slave                 HA command
  smart-link            Smart link configuration infomation
  snmp-agent            Specify SNMP(Simple Network Management Protocol)
                        configuration information
  ssh                   Set the SSH (secure shell) configuration attribute
  static-cr-lsp         Static-CR LSP configuration
  static-lsp            Static LSP configuration
  stelnet               Set Stelnet service attribute
  stp                   Specify Spanning Tree Protocol(STP) configuration
                        information
  super                 Modify super password parameters
  sysname               Specify the host name
  tcp                   Specify TCP(Transmission Control Protocol)
                        configuration             information
  test-packet           Set the test packet
  tftp                  Establish a TFTP connection
  tftp-server           TFTP Server
  time-range            Specify time-range configuration information
  trace                 Trace route(switch) to host on Data Link Layer
  tracert               Trace route to host
  traffic               Specify traffic configuration information
  traffic-policy        Apply specific traffic policy
  trunk-member          The member of trunk
  tunnel                Tunnel module
  tunnel-policy         Tunnel Policy
  udp-helper            UDP Helper
  undo                  Cancel current setting
  urpf                  Globe URPF 
  user-bind             User bind table
  user-interface        Configure the user terminal interface
  vlan                  Virtual LAN
  vrrp                  Specify configuration information of VRRP
  vrrp-group            Specify the configuration of the VRRP Management Group
  vsi                   Specify VSI(Virtual Switching Instance) configuration
                        information
  whitelist             White list of flow to CPU

 

[5328_Server]disp inter b
*down: administratively down
#down: EFM Fault
(l): loopback
(s): spoofing
(d): Dampening Suppressed
InUti/OutUti: input utility/output utility
Interface                   Physical Protocol InUti OutUti   inErrors  outErrors
GigabitEthernet0/0/1        down     --          0%     0%          0          0
GigabitEthernet0/0/2        down     --          0%     0%          0          0
GigabitEthernet0/0/3        down     --          0%     0%          0          0
GigabitEthernet0/0/4        down     --          0%     0%          0          0
GigabitEthernet0/0/5        down     --          0%     0%          0          0
GigabitEthernet0/0/6        down     --          0%     0%          0          0
GigabitEthernet0/0/7        down     --          0%     0%          0          0
GigabitEthernet0/0/8        up       --       0.01%  0.01%          0          0
GigabitEthernet0/0/9        down     --          0%     0%          0          0
GigabitEthernet0/0/10       up       --       0.01%  0.01%          0          0
GigabitEthernet0/0/11       down     --          0%     0%          0          0
GigabitEthernet0/0/12       up       --          0%  0.01%          0          0
GigabitEthernet0/0/13       down     --          0%     0%          0          0
GigabitEthernet0/0/14       down     --          0%     0%          0          0
GigabitEthernet0/0/15       down     --          0%     0%          0          0
GigabitEthernet0/0/16       down     --          0%     0%          0          0
GigabitEthernet0/0/17       down     --          0%     0%          0          0
GigabitEthernet0/0/18       down     --          0%     0%          0          0
GigabitEthernet0/0/19       down     --          0%     0%          0          0
GigabitEthernet0/0/20       down     --          0%     0%          0          0
GigabitEthernet0/0/21       down     --          0%     0%          0          0
GigabitEthernet0/0/22       up       --       0.01%  0.01%          0          0
GigabitEthernet0/0/23       down     --          0%     0%          0          0
GigabitEthernet0/0/24       down     --          0%     0%          0          0
GigabitEthernet0/1/1        up       --       0.01%  0.01%          0          0
GigabitEthernet0/1/2        down     --          0%     0%          0          0
GigabitEthernet0/1/3        down     --          0%     0%          0          0
GigabitEthernet0/1/4        down     --          0%     0%          0          0
MEth0/0/1                   down     down        0%     0%          0          0
NULL0                       up       up(s)       0%     0%          0          0
Vlanif1                     up       down        --     --          0          0
[5328_Server]disp inter g0/0/1
GigabitEthernet0/0/1 current state : DOWN
Description : Huawei, Quidway Series, GigabitEthernet0/0/1 Interface, Switch Port
PVID :    1
The Maximum Transmit Unit is 1500 bytes, The Maximum Frame Length is 1600
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0025-9e5c-ec5c
AUTO NEGOTIATION, SPEED 10M, DUPLEX HALF, LOOPBACK NOT SET;
Transmitter's pause : disable,  Receiver's pause : disable ;

Last 300 seconds input rate:  0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bits/sec, 0 packets/sec

Last 300 seconds Multicast input rate:  0 packets/sec
Last 300 seconds Multicast output rate: 0 packets/sec

Input:  0 Packets, 0 Bytes
        0 Broadcasts, 0 Multicasts
        0 Oversizes, 0 Undersizes
        0 FCSs, 0 Pauses

Output: 0 Packets, 0 Bytes
        0 Broadcasts, 0 Multicasts
        0 Oversizes, 0 Defers
        0 FCSs, 0 Pauses
        0 Collisions

[5328_Server]disp inter g0/0/12
GigabitEthernet0/0/12 current state : UP
Description : Huawei, Quidway Series, GigabitEthernet0/0/12 Interface, Switch Port
PVID :    1
The Maximum Transmit Unit is 1500 bytes, The Maximum Frame Length is 1600
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0025-9e5c-ec5c
AUTO NEGOTIATION, SPEED 1000M, DUPLEX FULL, LOOPBACK NOT SET;
Transmitter's pause : disable,  Receiver's pause : disable ;

Last 300 seconds input rate:  0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 2080 bits/sec, 1 packets/sec

Last 300 seconds Multicast input rate:  0 packets/sec
Last 300 seconds Multicast output rate: 1 packets/sec

Input:  8001 Packets, 1468162 Bytes
        1850 Broadcasts, 0 Multicasts
        0 Oversizes, 0 Undersizes
        0 FCSs, 0 Pauses

Output: 93808 Packets, 10079892 Bytes
        38840 Broadcasts, 48266 Multicasts
        0 Oversizes, 0 Defers
        0 FCSs, 0 Pauses
        0 Collisions

[5328_Server]disp inter g0/1/1
GigabitEthernet0/1/1 current state : UP
Description : Huawei, Quidway Series, GigabitEthernet0/1/1 Interface, Switch Port
PVID :    1
The Maximum Transmit Unit is 1500 bytes, The Maximum Frame Length is 1600
Internet protocol processing : disabled
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0025-9e5c-ec5c
NO AUTO NEGOTIATION, SPEED 1000M, DUPLEX FULL, LOOPBACK NOT SET;
Transmitter's pause : disable,  Receiver's pause : disable ;
Fiber transceiver information:
  VendorName : JDSU
  band;  1G
  Compliance : 1000BASE-SX
  PartNumber : PLRXPL-VI-S24-HW-1
  Modes:       Multi-Mode
  Fiber Type Supported and Max Transmission Distance:
  Length for 50/125um: 500 m
  Length for 62.5/125um: 300 m
  RxPower: -4.83 dBm(Normal)
  RxPower High Thresholds: 0.00 dBm
  RxPower Low Thresholds: -16.99 dBm
  TxPower: -5.03 dBm(Normal)
  TxPower High Thresholds: 0.00 dBm
  TxPower Low Thresholds: -9.50 dBm
  Bias current: 3990 uA(Normal)
  Bias High Thresholds: 18568 uA
  Bias Low Thresholds: 1072 uA

Last 300 seconds input rate:  4544 bits/sec, 4 packets/sec
Last 300 seconds output rate: 3200 bits/sec, 3 packets/sec

Last 300 seconds Multicast input rate:  1 packets/sec
Last 300 seconds Multicast output rate: 0 packets/sec

Input:  300651 Packets, 103118332 Bytes
        28853 Broadcasts, 45598 Multicasts
        0 Oversizes, 0 Undersizes
        0 FCSs, 0 Pauses

Output: 257316 Packets, 49838838 Bytes
        11671 Broadcasts, 2849 Multicasts
        0 Oversizes, 0 Defers
        0 FCSs, 0 Pauses
        0 Collisions

[5328_Server]