思科:适用于交换机,路由器:Cisco-sw#config terminalCisco-sw(config)#default interface <端口号>Cisco-sw(config)#default interface gigabitEthernet 0/24Interface GigabitEthernet0/2 set to default configuration华为:仅
syssysname 3SW004aaalocal-user admin password cipher abc123local-user admin service-type telnet http sshlocal-user admin privilege level 15quituser-interface vty 0 4authentication-mode aaaqgvrpu
加速cisco交换机启动时间加速cisco交换机端口初始化过程减少启动时间当把电脑连到一台交换机上时,可能需要30秒甚至更多的时间,电脑才可以使用网络进行通讯。如果你正着急等着要用,30秒的等待足以让你感觉无比漫长。让我们来看看如何才能加速交换机的端口初始化进程。 了解交换机端口初始化的过程 当把设备连上已经启动的交换机的端口,交换机端口一般会经历4各步骤。我们来仔细看一下。生成树协议(STP)
Copyright © 2005-2024 51CTO.COM 版权所有 京ICP证060544号