查询文档后归类出来.可用来参考.但是不太准确.有些还是不支持的..

 

支持路由器:

2610        2611        2620        2621

2610XM        2620XM        2621XM        2650XM        2651XM

2691

3725        3745

3620        3640        3660

7200

模块类型:

C7200:

Slot 0:

  C7200-IO-FE   <------> 支持1个Fastethernet接口

  C7200-IO-2FE  <------> 支持2个 Fastethernet接口

  C7200-IO-GE-E <------> 插这个卡以后会同时出现2个端口,Ethernet0/0和GigabitEthernet0/0

  注意:这三个卡只允许插在Slot0口,如果插入后面的slot口是无效的。

Slot 1-5:

  PA-2FE-TX <------> 支持2个Fastethernet接口

  PA-FE-TX  <------> 支持1个Fastethernet接口

  PA-4E     <------> 支持4个Ethernet接口

  PA-4T+    <------> 支持4个serial接口

  PA-8E     <------> 支持8个Ethernet接口

  PA-8T     <------> 支持8个serial接口

  PA-A1     <------> 支持1个ATM port adapter接口

  PA-GE     <------> 支持1个GigabitEthernet接口

  PA-POS-OC3<------> 支持1个Packet Over SONET/SDH接口(用于更高速度的接口)

C3600(3620/3640/3660)

  NM-16ESW <------> 支持16个Fastethernet接口(交换模块,在使用此模块做交换实验时候,请使用no ip routing 关闭端口路由)

  NM-1E    <------> 支持1个Ethernet接口

  NM-1FE-TX<------> 支持1个Fastethernet接口 

  NM-4E    <------> 支持4个Ethernet接口

  NM-4T    <------> 支持4个serial接口

  Leopard-2FE<------>支持2个Fastethernet接口(3660专用,并且只能在slot 0 下使用)

注意:3620只能使用2个slot,3640可以使用4个slot,除Leopard-2FE模块做了限制,其他模块没有做限制插具体哪个slot。

C3725/C3745/C2691

  GT96100-FE <------>支持2个Fastethernet接口(只限制在slot 0)

  NM-16ESW   <------>支持16个Fastethernet接口(不做重复说明)

  NM-1FE-TX  <------>支持1个Fastethernet接口

  NM-4T      <------>支持4个serial接口

C2600(2610/2611/2620/2621/2610XM/2620XM/2650XM)

  NM-16ESW <------> 支持16个Fastethernet接口

  NM-1E    <------> 支持1个Ethernet接口

  NM-1FE-TX<------> 支持1个Fastethernet接口

  NM-4E    <------> 支持4个Ethernet接口

  CISCO2600-MB-E<------>支持1个Ethernet接口

  CISCO2600-MB-2E<------>支持2个Ethernet接口

  CISCO2600-MB-1FE<------>支持1个Fastethernet接口

  CISCO2600-MB-2FE<------>支持2个Fastethernet接口

注:DynamipsGUI里的模块CISCO2600-MB-2E,CISCO2600-MB-2FE,并且只有2620类型可选

Dynamipsee里有2610/2611/2620/2621/2610XM/2620XM/2650XM类型选择,但没有2610/2611/2620/2621/2610XM/2620XM/2650XM

NPE类型:

npe-100

npe-150

npe-175

npe-200

npe-225

npe-300

npe-400

npe-g1

npe-g2

 

 

 

============================================

 

以下是http://dynagen.org/tutorial.htm 的一些资料

 

 

1710

    Slots: 0 (available)

    WIC slots: 0

    CISCO1710-MB-1FE-1E  (1 FastEthernet port and 1 Ethernet port, automatically used)

    Note, interfaces do not use a slot designation (e.g. “f0”)

1720

    Note, interfaces do not use a slot designation (e.g. “f0”)

1721

    Note, interfaces do not use a slot designation (e.g. “f0”)

1750

    Note, interfaces do not use a slot designation (e.g. “f0”)

1751

1760

    Slots: 0 (available)

    WIC slots: 2

    C1700-MB-1ETH (1 FastEthernet port, automatically used)

Cards:

    - WIC-1T (1 Serial port)

    - WIC-2T (2 Serial ports)

    - WIC-1ENET (1 Ethernet ports)

===========2600s===========

2610

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-1E (1 Ethernet port, automatically used)

2611

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-2E (2 Ethernet ports, automatically used)

2620

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-1FE (1 FastEthernet port, automatically used)

2621

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)

2610XM

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-1FE (1 FastEthernet port, automatically used)

2611XM

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)

2620XM

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-1FE (1 FastEthernet port, automatically used)

2621XM

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)

2650XM

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-1FE (1 FastEthernet port, automatically used)

2651XM

    Slots: 1 (available)

    WIC slots: 3

    CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)

Cards:

    - NM-1E        (Ethernet, 1 port)

    - NM-4E        (Ethernet, 4 ports)

    - NM-1FE-TX    (FastEthernet, 1 port)

    - NM-16ESW     (Ethernet switch module, 16 ports)

    - NM-NAM

    - NM-IDS

    - WIC-1T (1 Serial port)

    - WIC-2T (2 Serial ports)

===========3600s===========

3660

    Slots: 6 (available)

3640

    Slots: 4

3620

    Slots: 2

Cards:

    - NM-1E        (Ethernet, 1 port)

    - NM-4E        (Ethernet, 4 ports)

    - NM-1FE-TX    (FastEthernet, 1 port)

    - NM-16ESW     (Ethernet switch module, 16 ports)

    - NM-4T        (Serial, 4 ports)

    - Leopard-2FE  (Cisco 3660 FastEthernet in slot 0, automatically used)

===========3700s===========

2691 (The 2691 is essentially a 3700 with 1 slot)

    Slots: 1 (available)

    WIC slots: 3

3725

    Slots: 2 (available)

    WIC slots: 3

3745

    Slots: 4 (available)

    WIC slots: 3

Cards:

    - NM-1FE-TX    (FastEthernet, 1 port)

    - NM-4T        (Serial, 4 ports)

    - NM-16ESW     (Ethernet switch module, 16 ports)

    - GT96100-FE   (2 integrated ports, automatically used)

    - NM-NAM

    - NM-IDS

    - WIC-1T (1 Serial port)

    - WIC-2T (2 Serial ports)

===========7200s===========

7206

    Slots: 6 (available)

Chassis types:

- STD

- VXR

NPEs:

- NPE-100

- NPE-150

- NPE-175

- NPE-200

- NPE-225

- NPE-300

- NPE-400

- NPE-G2 (Requires the use of NPE-G2 IOS images)

Cards:

- C7200-IO-FE  (FastEthernet, slot 0 only)

- C7200-IO-2FE (FastEthernet, 2 ports, slot 0 only)

- C7200-IO-GE-E  (GigabitEthernet interface only, Ethernet not currently functional, slot 0 only)

- PA-FE-TX (FastEthernet)

- PA-2FE-TX (FastEthernet, 2 ports)

- PA-4E (Ethernet, 4 ports)

- PA-8E (Ethernet, 8 ports)

- PA-4T+   (Serial, 4 ports)

- PA-8T (Serial, 8 ports)

- PA-A1 (ATM)

- PA-POS-OC3 (POS)

- PA-GE (GigabitEthernet)