拓扑是官方下载的, 内容是我亲手实验的记录 希望大家可以参考
 
CCNA试验-交换机基础_vlan
 
学习目标
1 检查检验默认配置 
Switch#show version
 Switch#show  running-config
2创建基本交换机配置
3 配置口令
4保存结果并检验
 Switch#show  startup-config
 
理解交换机基本配置
1  Switch#show  running-config    知道是24个快速以太网端口 2G比特端口
 
Building configuration...
 
Current configuration : 925 bytes
!
version 12.2
no service password-encryption
!
hostname Switch
!
!
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
......
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface Vlan1
 no ip address
 shutdown
!
line con 0
!
line vty 0 4
 login
line vty 5 15
 login
!
!
End
 
 
2  Switch#show startup-config
startup-config is not present
 
3  Switch#show version  版本信息
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 12-Oct-05 22:05 by pt_team
 
ROM: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
 
System returned to ROM by power-on
 
Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.
 
 
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
 
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 0060.47AC.1EB8
Motherboard assembly number     : 73-9832-06
Power supply part number        : 341-0097-02
........ 
4  Switch#show vlan
 
VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                Fa0/17, Fa0/18, Fa0/19, Fa0/20
                                                Fa0/21, Fa0/22, Fa0/23, Fa0/24
                                                Gig1/1, Gig1/2
10   VLAN10                           active   
30   VLAN30                           active   
1002 fddi-default                     active   
1003 token-ring-default               active   
1004 fddinet-default                  active   
1005 trnet-default                    active   
 
  对交换机进行基本的配置
1 设置登陆口令cisco     并使用登陆口令配置  vty线路  0 15
S1#configure terminal
 
Enter the configuration commands, one for each line. When you are finished,
return to global configuration mode by entering the exit command or pressing
Ctrl-Z. 
S1(config)#line console 0 
S1(config-line)#password cisco 
S1(config-line)#login 
S1(config-line)#line vty 0 15 
S1(config-line)#password cisco 
S1(config-line)#login 
S1(config-line)#exit
2 设置特权口令密码为 class
S1(config)#enable secret class
3 创建便于在pc机上管理switchvlan 99 这个是任意的
 
Switch(config)# vlan 99
Switch(config-vlan)#exit
Switch(config)# vlan 99
Switch(config-vlan)#exit
Switch(config)#inter vlan 99
 
%LINK-5-CHANGED: Interface Vlan99, changed state to upSwitch(config-if)#
Switch(config-if)#ip add 172.17.99.11 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#
%SYS-5-CONFIG_I: Configured from console by console
Switch# 
4 将交换机的所有端口加入vlan 99
S1#configure terminal
S1(config)#interface range fa0/1 - 24
Switch(config-if-range)#switchport access vlan 99
 
%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to upSwitch(config-if-range)#exit
Switch(config)#
 
5 配置交换机的默认网关 注意是在全局配置模式下完成
Switch(config)# ip default-gateway 172.17.99.1  
Switch(config)#
%SYS-5-CONFIG_I: Configured from console by console
 
6 查看管理lan 设置
 
Switch#show inter vlan 99
Vlan99 is up, line protocol is up
  Hardware is CPU Interface, address is 0060.47ac.1eb8 (bia 0060.47ac.1eb8)
  Internet address is 172.17.99.11/24
  MTU 1500 bytes, BW 100000 Kbit, DLY 1000000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 21:40:21, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     1682 packets input, 530955 bytes, 0 no buffer
     Received 0 broadcasts (0 IP multicast)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     563859 packets output, 0 bytes, 0 underruns
     0 output errors, 23 interface resets
     0 output buffer failures, 0 output buffers swapped out
7 设置pc
PC1   172.17.99.21   255.255.255.0  172.17.99.11
PC2   172.17.99.22   255.255.255.0   172.17.99.11
S1     VLAN99   172.17.99.11 255.255.255.0 172.17.99.1
8 保存配置并检验
 
Switch#copy run start
Destination filename [startup-config]?
Building configuration...
[OK]
Switch#show startup-config
Using 1768 bytes
!
version 12.2
no service password-encryption
!
hostname Switch
!
enable secret 5 $1$mERr$9cTjUIEqNGurQiFU.ZeCi1
!
!
!
interface FastEthernet0/1
 switchport access vlan 99
!
interface FastEthernet0/2
 switchport access vlan 99
!
 
....
interface FastEthernet0/23
 switchport access vlan 99
!
interface FastEthernet0/24
 switchport access vlan 99
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface Vlan1
 no ip address
 shutdown
!
interface Vlan99
 ip address 172.17.99.11 255.255.255.0
!
ip default-gateway 172.17.99.1
注意
!
line con 0
 password cisco
 login
!
line vty 0 4
 password cisco
 login
line vty 5 15
 password cisco
 login
!
!
end
pc2上检查
PC>ping 172.17.99.21
 
PC>ping 172.17.99.22
 
PC>ping 172.17.99.11
成功。。