2009/03/11
实现EM
EM Process:
1.activate Extension Mobility
2.查看服务[url]https://10.1.1.100/manager/list[/url]
3.service>service parameters,从下拉菜单选择Cisco Extension Mobility
4.点至default device profile
Device > Device Settings > Device Profile Default
5.Configuring User Device Profiles
Device > Device Settings > Device Profile
6.Associating Users with Device Profiles
user>global directory>Cisco Extension Mobility>Associate the user device profile with the user account, as shown in Figure 17-8, and then click the Update Selected button.
7.Creating the Extension Mobility Service
Feature > Cisco IP Phone Services>Add a New IP Phone Service
[url]http://<CCM_IP>/emapp/EMAppServlet?device=#DEVICENAME[/url][/url]#
8.Updating Cisco IP Phones to Add Extension Mobility Support
故障1:CCM上的CIPT按services按钮出现HTTP404错误
solution:
1.升级到CIPT7.0.1,故障依旧
2.关闭CCM上的CIPT,此时CIPT7.0.1@Chicago上出现了service列表,看来两个CIPT不能同时启用,修改EM services参数“mulitiple logins allowed”故障依旧
3.在Chicago上登陆EM,输入口令后出现“host not found”,重启feature > Extension Mobility > update/update subscriptions
4.重启IIS Admin Service/World Wide Web Publishing Service/后无法进入CCM管理界面,重启CCM后可以正常进入
 
故障2:无法手动logout,暂时还没有解决
Cooperate Directory
1.修改URL Directory:Enterprise Parameters > URL Deirectories,把CCM机器名改成10.1.1.100
2.在Chicago上点击directory按钮就可以看到Cooperate Directory,用CIPT7.0.1@CCM不行,而且CIPT7.0.1@CCMCIPT7.0.1@Chicago不能同时开
Address Books
1.Feature > cisco ip phone service > 添加如下参数:
service RUL:
[url]http://10.1.1.100/ccmpd/xmlAddressBookInput.asp[/url]
service parameter information:
UserID
Parameter Name:UserID
Parameter Name:UserID
Parameter Description:UserID
勾选Parameter is Required
UserPIN:
Parameter Name:UserPIN
Parameter Name:PIN
Parameter Description:UserPIN
勾选Parameter is Required/parameter is a password
 
 
 
 
2009/03/12上午
实现CCM-CME双向互通,关键配置如下:
HQ:
dial-peer voice 201 voip
 destination-pattern 1...
 session target ipv4:10.1.1.100
 dtmf-relay h245-alphanumeric
 codec g711ulaw
!
UK:
dial-peer voice 300 voip
 destination-pattern 1...
 session target ipv4:10.1.1.100
 dtmf-relay h245-alphanumeric
 codec g711ulaw
!
dial-peer voice 3001 voip
 destination-pattern 3...
 session target ipv4:10.3.110.100
!
CCM:
1.添加h.323 GW指向UK(物理IP或者loopback口均可)
2.添加Route Pattern,3XXX指向UK_GW
3.CCM_Phone1_line1设置为7751001001,CCM_Phone1_line1设置为7751001011
4.设置Translation pattern 1XXX,被叫加前缀775100
经验:此Translation pattern对被叫起作用,不管cluster内部分公司打进来(Chicago-->CCM),还是外部打进来(UK-CCM),都会把被叫变为7751001XXX。
5.significant digits也可以设置被叫号码,一般为forward all;
HQ@GW-->dial-peer">UK@GW-->HQ@GW-->dial-peer voice 201 voip(匹配1...,被叫送到10.1.1.00)-->CCM-->h323 GW(指向UK的h323 GW)-->significant digits(inbound forward all)-->translation pattern(1XXX->7751001XXX)-->CCM数据库查找--->7751001001振铃